The LLCC block in SM8450, SM8550 and SM8650 have a new register space for Broadcast_AND region. This is used to check that all channels have bit set to "1", mainly in SCID activation/deactivation. Previously we were mapping only the Broadcast_OR region assuming there was only one broadcast register region. Now we also map Broadcast_AND region. Signed-off-by: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx> --- .../devicetree/bindings/cache/qcom,llcc.yaml | 27 +++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index 07ccbda4a0ab..a6237028957f 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -141,8 +141,31 @@ allOf: - qcom,sm8150-llcc - qcom,sm8250-llcc - qcom,sm8350-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + - description: LLCC1 base register region + - description: LLCC2 base register region + - description: LLCC3 base register region + - description: LLCC broadcast base register region + reg-names: + items: + - const: llcc0_base + - const: llcc1_base + - const: llcc2_base + - const: llcc3_base + - const: llcc_broadcast_base + + - if: + properties: + compatible: + contains: + enum: - qcom,sm8450-llcc - qcom,sm8550-llcc + - qcom,sm8650-llcc then: properties: reg: @@ -151,7 +174,8 @@ allOf: - description: LLCC1 base register region - description: LLCC2 base register region - description: LLCC3 base register region - - description: LLCC broadcast base register region + - description: LLCC broadcast OR register region + - description: LLCC broadcast AND register region reg-names: items: - const: llcc0_base @@ -159,6 +183,7 @@ allOf: - const: llcc2_base - const: llcc3_base - const: llcc_broadcast_base + - const: llcc_broadcast_and_base additionalProperties: false -- 2.25.1