Hello:
This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:
On Tue, 26 Mar 2024 17:23:03 +0100 you wrote:
> This patch series adds the driver and the devicetree binding documentation
> for the Airoha en8811h PHY.
>
> Changes in PATCH v3:
>
> air_en8811h.c:
> * Dedicated __air_buckpbus_reg_modify()
> * Renamed host to mcu
> * Append 'S' to AIR_PHY_LED_DUR_BLINK_xxxM
> * Handle hw-leds as in mt798x_phy_led_hw_control_set(), add 2500Mbps
> * Moved firmware loading to .probe()
> * Disable leds after firmware load
> * Moved 'waiting for mcu ready' to dedicated function
> * Return -EINVAL from .config_aneg() when auto-neg is turned off
> * Removed check for AUTONEG_ENABLE from .read_status()
> * Added more details about mode 1
> * Use macros from wordpart.h
> * Set rate_matching in .read_status(), fixes 100Mbps traffic
>
> [...]
Here is the summary with links:
- [v3,net-next,1/2] dt-bindings: net: airoha,en8811h: Add en8811h
https://git.kernel.org/netdev/net-next/c/2434ba2bc851
- [v3,net-next,2/2] net: phy: air_en8811h: Add the Airoha EN8811H PHY driver
https://git.kernel.org/netdev/net-next/c/71e79430117d
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
