From: Alice Guo <alice.guo@xxxxxxx>
Add lpuart device in cm40 subsystem.
Signed-off-by: Alice Guo <alice.guo@xxxxxxx>
Reviewed-by: Peng Fan <peng.fan@xxxxxxx>
Reviewed-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
index 10a05db06ade9..5cff052b95d18 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
@@ -20,6 +20,18 @@ cm40_subsys: bus@34000000 {
ranges = <0x34000000 0x0 0x34000000 0x4000000>;
interrupt-parent = <&cm40_intmux>;
+ cm40_lpuart: serial@37220000 {
+ compatible = "fsl,imx8qxp-lpuart";
+ reg = <0x37220000 0x1000>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cm40_uart_lpcg IMX_LPCG_CLK_1>, <&cm40_uart_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg", "baud";
+ assigned-clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_M4_0_UART>;
+ status = "disabled";
+ };
+
cm40_i2c: i2c@37230000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x37230000 0x1000>;
@@ -53,6 +65,18 @@ cm40_intmux: intmux@37400000 {
status = "disabled";
};
+ cm40_uart_lpcg: clock-controller@37620000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x37620000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>,
+ <&cm40_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>;
+ clock-output-names = "cm40_lpcg_uart_clk",
+ "cm40_lpcg_uart_ipg_clk";
+ power-domains = <&pd IMX_SC_R_M4_0_UART>;
+ };
+
cm40_i2c_lpcg: clock-controller@37630000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x37630000 0x1000>;
--
2.34.1
