Re: [PATCH v11 3/7] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF

Neil Armstrong <neil.armstrong@xxxxxxxxxx> · Fri, 29 Mar 2024 17:06:51 +0100

On 29/03/2024 13:35, Jerome Brunet wrote:

On Mon 25 Mar 2024 at 12:09, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:

In order to setup the DSI clock, let's make the unused VCLK2 clock path
configuration via CCF.

The nocache option is removed from following clocks:
- vclk2_sel
- vclk2_input
- vclk2_div
- vclk2
- vclk_div1
- vclk2_div2_en
- vclk2_div4_en
- vclk2_div6_en
- vclk2_div12_en
- vclk2_div2
- vclk2_div4
- vclk2_div6
- vclk2_div12
- cts_encl_sel

vclk2 and vclk2_div uses the newly introduced vclk regmap driver
to handle the enable and reset bits.

In order to set a rate on cts_encl via the vclk2 clock path,
the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
to keep CCF from selection a parent.
The parents of cts_encl_sel & vclk2_sel are expected to be defined
in DT or manually set by the display driver at some point.

The following clock scheme is to be used for DSI:

xtal
\_ gp0_pll_dco
    \_ gp0_pll
       |- vclk2_sel
       |  \_ vclk2_input
       |     \_ vclk2_div
       |        \_ vclk2
       |           \_ vclk2_div1
       |              \_ cts_encl_sel
       |                 \_ cts_encl	-> to VPU LCD Encoder
       |- mipi_dsi_pxclk_sel
       \_ mipi_dsi_pxclk_div
          \_ mipi_dsi_pxclk		-> to DSI controller

The mipi_dsi_pxclk_div is set as bypass with a single /1 entry in div_table
in order to use the same GP0 for mipi_dsi_pxclk and vclk2_input.

The SET_RATE_PARENT is only set on the mipi_dsi_pxclk_sel clock so the
DSI bitclock is the reference base clock to calculate the vclk2_div value
when pixel clock is set on the cts_encl endpoint.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
  drivers/clk/meson/Kconfig |  1 +
  drivers/clk/meson/g12a.c  | 72 ++++++++++++++++++++++++++++++++++-------------
  2 files changed, 53 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 8a9823789fa3..59a40a49f8e1 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -144,6 +144,7 @@ config COMMON_CLK_G12A
  	select COMMON_CLK_MESON_EE_CLKC
  	select COMMON_CLK_MESON_CPU_DYNDIV
  	select COMMON_CLK_MESON_VID_PLL_DIV
+	select COMMON_CLK_MESON_VCLK
  	select MFD_SYSCON
  	help
  	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 90f4c6103014..083882e53b65 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -22,6 +22,7 @@
  #include "clk-regmap.h"
  #include "clk-cpu-dyndiv.h"
  #include "vid-pll-div.h"
+#include "vclk.h"
  #include "meson-eeclk.h"
  #include "g12a.h"
  
@@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
  		.ops = &clk_regmap_mux_ops,
  		.parent_hws = g12a_vclk_parent_hws,
  		.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_NO_REPARENT,
  	},
  };
  
@@ -3193,7 +3194,6 @@ static struct clk_regmap g12a_vclk2_input = {
  		.ops = &clk_regmap_gate_ops,
  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
  		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
  	},
  };
  
@@ -3215,19 +3215,32 @@ static struct clk_regmap g12a_vclk_div = {
  };
  
  static struct clk_regmap g12a_vclk2_div = {
-	.data = &(struct clk_regmap_div_data){
-		.offset = HHI_VIID_CLK_DIV,
-		.shift = 0,
-		.width = 8,
+	.data = &(struct meson_vclk_div_data){
+		.div = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.enable = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 16,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_DIV,
+			.shift   = 17,
+			.width   = 1,
+		},
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
  	},
  	.hw.init = &(struct clk_init_data){
  		.name = "vclk2_div",
-		.ops = &clk_regmap_divider_ops,
+		.ops = &meson_vclk_div_ops,
  		.parent_hws = (const struct clk_hw *[]) {
  			&g12a_vclk2_input.hw
  		},
  		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_GATE,
  	},
  };
  
@@ -3246,16 +3259,24 @@ static struct clk_regmap g12a_vclk = {
  };
  
  static struct clk_regmap g12a_vclk2 = {
-	.data = &(struct clk_regmap_gate_data){
-		.offset = HHI_VIID_CLK_CNTL,
-		.bit_idx = 19,
+	.data = &(struct meson_vclk_gate_data){
+		.enable = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 19,
+			.width   = 1,
+		},
+		.reset = {
+			.reg_off = HHI_VIID_CLK_CNTL,
+			.shift   = 15,
+			.width   = 1,
+		},
  	},
  	.hw.init = &(struct clk_init_data) {
  		.name = "vclk2",
-		.ops = &clk_regmap_gate_ops,
+		.ops = &meson_vclk_gate_ops,
  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
  		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3339,7 +3360,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
  		.ops = &clk_regmap_gate_ops,
  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
  		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3353,7 +3374,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
  		.ops = &clk_regmap_gate_ops,
  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
  		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3367,7 +3388,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
  		.ops = &clk_regmap_gate_ops,
  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
  		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3381,7 +3402,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
  		.ops = &clk_regmap_gate_ops,
  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
  		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3395,7 +3416,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
  		.ops = &clk_regmap_gate_ops,
  		.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
  		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3461,6 +3482,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
  			&g12a_vclk2_div2_en.hw
  		},
  		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3474,6 +3496,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
  			&g12a_vclk2_div4_en.hw
  		},
  		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3487,6 +3510,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
  			&g12a_vclk2_div6_en.hw
  		},
  		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3500,6 +3524,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
  			&g12a_vclk2_div12_en.hw
  		},
  		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
  	},
  };
  
@@ -3561,7 +3586,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
  		.ops = &clk_regmap_mux_ops,
  		.parent_hws = g12a_cts_parent_hws,
  		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
  	},
  };
  
@@ -3717,15 +3742,22 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
  		.ops = &clk_regmap_mux_ops,
  		.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
  		.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
-		.flags = CLK_SET_RATE_NO_REPARENT,
+		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
  	},
  };
  
+/* Force as bypass by forcing a single /1 table entry, and not rely of boot value */

The comment here is not entirely accurate.

The table below will actually force to only use a 1 divider on
.set_rate(), not on boot, AFAICT.

The boot value will stay in the register until the first call to set_rate().

Considering this is quite fragile as it is, It would be nice to prefix
the updated comment with "FIXME"

Ack


+static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
+	{ .val = 0, .div = 1 },
+	{ /* sentinel */ },
+};
+
  static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
  	.data = &(struct clk_regmap_div_data){
  		.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
  		.shift = 0,
  		.width = 7,
+		.table = g12a_mipi_dsi_pxclk_div_table,
  	},
  	.hw.init = &(struct clk_init_data){
  		.name = "mipi_dsi_pxclk_div",










