On Fri, Mar 29, 2024 at 04:09:49PM +0800, Richard Zhu wrote: > Add binding for controller ID and HSIO configuration setting of the > i.MX8Q HSIO SerDes PHY. > > Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> > --- > include/dt-bindings/phy/phy-imx8-pcie.h | 26 +++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) This one should be first patch. (1/3). After fix small improve Reviewed-by: Frank Li <Frank.Li@xxxxxxx> > > diff --git a/include/dt-bindings/phy/phy-imx8-pcie.h b/include/dt-bindings/phy/phy-imx8-pcie.h > index 8bbe2d6538d8..5cd5580879fa 100644 > --- a/include/dt-bindings/phy/phy-imx8-pcie.h > +++ b/include/dt-bindings/phy/phy-imx8-pcie.h > @@ -11,4 +11,30 @@ > #define IMX8_PCIE_REFCLK_PAD_INPUT 1 > #define IMX8_PCIE_REFCLK_PAD_OUTPUT 2 > > +/* > + * i.MX8QM HSIO subsystem has three lane PHYs and three controllers: > + * PCIEA(2 lanes capapble PCIe controller), PCIEB (only support one > + * lane) and SATA. Suggest add empty line between segment. > + * In the different use cases. PCIEA can be binded to PHY lane0, lane1 > + * or Lane0 and lane1. PCIEB can be binded to lane1 or lane2 PHY. SATA > + * can only be binded to last lane2 PHY. > + * Define i.MX8Q HSIO controller ID here to specify the controller > + * binded to the PHY. > + * Meanwhile, i.MX8QXP HSIO subsystem has one lane PHY and PCIEB(only > + * support one lane) controller. > + */ > +#define IMX8Q_HSIO_PCIEA_ID 0 > +#define IMX8Q_HSIO_PCIEB_ID 1 > +#define IMX8Q_HSIO_SATA_ID 2 > + > +/* > + * On i.MX8QM, PCIEA is mandatory required if the HSIO is enabled. > + * Define configurations beside PCIEA is enabled. > + * On i.MX8QXP, HSIO module only has PCIEB and one lane PHY. > + * The "IMX8Q_HSIO_CFG_PCIEB" can be used on i.MX8QXP platforms. > + */ > +#define IMX8Q_HSIO_CFG_SATA 1 > +#define IMX8Q_HSIO_CFG_PCIEB 2 > +#define IMX8Q_HSIO_CFG_PCIEBSATA 3 > + > #endif /* _DT_BINDINGS_IMX8_PCIE_H */ > -- > 2.37.1 >
