[PATCH 2/3] reset: reset-meson: add support for Amlogic T7 SoC Reset Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Zelong Dong <zelong.dong@xxxxxxxxxxx>

There are 7 sets of Reset Source in Amlogic T7 SoC Reset Controller,
and the offset between base and level registers is 0x40.
Add a new compatible string and struct meson_reset_param to support
the reset controller on T7 SoC.

Signed-off-by: Zelong Dong <zelong.dong@xxxxxxxxxxx>
Signed-off-by: Kelvin Zhang <kelvin.zhang@xxxxxxxxxxx>
---
 drivers/reset/reset-meson.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index f78be97898bc..1e9fca3e30e8 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -102,6 +102,11 @@ static const struct meson_reset_param meson_s4_param = {
 	.level_offset	= 0x40,
 };
 
+static const struct meson_reset_param t7_param = {
+	.reg_count      = 7,
+	.level_offset   = 0x40,
+};
+
 static const struct of_device_id meson_reset_dt_ids[] = {
 	 { .compatible = "amlogic,meson8b-reset",    .data = &meson8b_param},
 	 { .compatible = "amlogic,meson-gxbb-reset", .data = &meson8b_param},
@@ -109,6 +114,7 @@ static const struct of_device_id meson_reset_dt_ids[] = {
 	 { .compatible = "amlogic,meson-a1-reset",   .data = &meson_a1_param},
 	 { .compatible = "amlogic,meson-s4-reset",   .data = &meson_s4_param},
 	 { .compatible = "amlogic,c3-reset",   .data = &meson_s4_param},
+	 { .compatible = "amlogic,t7-reset",   .data = &t7_param},
 	 { /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, meson_reset_dt_ids);

-- 
2.37.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux