From: Siddharth Vadapalli <s-vadapalli@xxxxxx> Enable MAIN CPSW2G and add alias for it to enable Linux to fetch MAC Address for the port directly from U-Boot. Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> Signed-off-by: Jayesh Choudhary <j-choudhary@xxxxxx> Signed-off-by: Chintan Vankar <c-vankar@xxxxxx> --- Link to v5: https://lore.kernel.org/r/20240314072129.1520475-4-c-vankar@xxxxxx/ Changes from v5 to v6: - Updated order of properties in Device Nodes based on https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 50 ++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index 1f390c22844e..637c8223b561 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -28,6 +28,7 @@ aliases { i2c0 = &wkup_i2c0; i2c3 = &main_i2c0; ethernet0 = &mcu_cpsw_port1; + ethernet1 = &main_cpsw1_port1; }; memory@80000000 { @@ -281,6 +282,30 @@ &wkup_gpio0 { &main_pmx0 { bootph-all; + main_cpsw2g_default_pins: main-cpsw2g-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */ + J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */ + J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */ + J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */ + J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */ + J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */ + J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */ + J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */ + J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */ + J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */ + J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */ + J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */ + >; + }; + + main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */ + J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */ + >; + }; + main_uart8_pins_default: main-uart8-default-pins { bootph-all; pinctrl-single,pins = < @@ -833,6 +858,31 @@ &mcu_cpsw_port1 { phy-handle = <&mcu_phy0>; }; +&main_cpsw1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw2g_default_pins>; + status = "okay"; +}; + +&main_cpsw1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw2g_mdio_default_pins>; + status = "okay"; + + main_cpsw1_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&main_cpsw1_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&main_cpsw1_phy0>; + status = "okay"; +}; + &mailbox0_cluster0 { status = "okay"; interrupts = <436>; -- 2.34.1
