From: Siddharth Vadapalli <s-vadapalli@xxxxxx> J784S4 SoC has MAIN CPSW2G and CPSW9G instances of the CPSW Ethernet Switch. CPSW2G has 1 external port and 1 host port while CPSW9G has 8 external ports and 1 host port. Add device-tree nodes for MAIN CPSW2G and CPSW9G and disable them by default. MAIN CPSW2G will be enabled in the board file while device-tree overlays will be used to enable CPSW9G. Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> Signed-off-by: Chintan Vankar <c-vankar@xxxxxx> --- Link to v5: https://lore.kernel.org/r/20240314072129.1520475-3-c-vankar@xxxxxx/ Changes from v5 to v6: - Updated order of properties in Device Nodes based on https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 187 +++++++++++++++++++++ 1 file changed, 187 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index b67c37460a73..7dfa43d25d38 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -48,6 +48,19 @@ scm_conf: bus@100000 { #size-cells = <1>; ranges = <0x00 0x00 0x00100000 0x1c000>; + cpsw1_phy_gmii_sel: phy@4034 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4034 0x4>; + #phy-cells = <1>; + }; + + cpsw0_phy_gmii_sel: phy@4044 { + compatible = "ti,j784s4-cpsw9g-phy-gmii-sel"; + reg = <0x4044 0x20>; + #phy-cells = <1>; + ti,qsgmii-main-ports = <7>, <7>; + }; + serdes_ln_ctrl: mux-controller@4080 { compatible = "reg-mux"; reg = <0x00004080 0x30>; @@ -1439,6 +1452,180 @@ cpts@310d0000 { }; }; + main_cpsw0: ethernet@c000000 { + compatible = "ti,j784s4-cpswxg-nuss"; + reg = <0x00 0xc000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + clocks = <&k3_clks 64 0>; + clock-names = "fck"; + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xca00>, + <&main_udmap 0xca01>, + <&main_udmap 0xca02>, + <&main_udmap 0xca03>, + <&main_udmap 0xca04>, + <&main_udmap 0xca05>, + <&main_udmap 0xca06>, + <&main_udmap 0xca07>, + <&main_udmap 0x4a00>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + main_cpsw0_port1: port@1 { + reg = <1>; + label = "port1"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port2: port@2 { + reg = <2>; + label = "port2"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port3: port@3 { + reg = <3>; + label = "port3"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port4: port@4 { + reg = <4>; + label = "port4"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port5: port@5 { + reg = <5>; + label = "port5"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port6: port@6 { + reg = <6>; + label = "port6"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port7: port@7 { + reg = <7>; + label = "port7"; + ti,mac-only; + status = "disabled"; + }; + + main_cpsw0_port8: port@8 { + reg = <8>; + label = "port8"; + ti,mac-only; + status = "disabled"; + }; + }; + + main_cpsw0_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 64 0>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 64 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + + main_cpsw1: ethernet@c200000 { + compatible = "ti,j721e-cpsw-nuss"; + reg = <0x00 0xc200000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0xc200000 0x00 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + clocks = <&k3_clks 62 0>; + clock-names = "fck"; + power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xc640>, + <&main_udmap 0xc641>, + <&main_udmap 0xc642>, + <&main_udmap 0xc643>, + <&main_udmap 0xc644>, + <&main_udmap 0xc645>, + <&main_udmap 0xc646>, + <&main_udmap 0xc647>, + <&main_udmap 0x4640>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + main_cpsw1_port1: port@1 { + reg = <1>; + label = "port1"; + phys = <&cpsw1_phy_gmii_sel 1>; + ti,mac-only; + status = "disabled"; + }; + }; + + main_cpsw1_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 62 0>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 62 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + main_mcan0: can@2701000 { compatible = "bosch,m_can"; reg = <0x00 0x02701000 0x00 0x200>, -- 2.34.1
