On Thu, Feb 29, 2024 at 01:53:37PM +0530, Parthiban Nallathambi wrote: > Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with > 512MB RAM and 8GB eMMC or 512MB NAND flash. Development > board comes with either eMMC or NAND based SoM with peripheral > interfaces like 2 x ethernet, 2 x USB, LCD, CSI and more. > > Signed-off-by: Parthiban Nallathambi <parthiban@xxxxxxxxxxx> > --- > arch/arm/boot/dts/nxp/imx/Makefile | 2 + > .../imx/imx6ull-seeed-npi-dev-board-emmc.dts | 19 + > .../imx/imx6ull-seeed-npi-dev-board-nand.dts | 19 + > .../nxp/imx/imx6ull-seeed-npi-dev-board.dtsi | 424 ++++++++++++++++++ > .../boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi | 155 +++++++ > 5 files changed, 619 insertions(+) > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi Could you elaborate a bit the point of splitting imx6ull-seeed-npi.dtsi and imx6ull-seeed-npi-dev-board.dtsi? Why cannot they be a single file? Shawn