Re: [PATCH v1 2/2] thermal: amlogic: support A1 SoC family Thermal Sensor controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/03/2024 14:37, Dmitry Rokosov wrote:
In comparison to other Amlogic chips, there is one key difference.
The offset for the sec_ao base, also known as u_efuse_off, is special,
while other aspects remain the same.

Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
---
  drivers/thermal/amlogic_thermal.c | 10 ++++++++++
  1 file changed, 10 insertions(+)

diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index 5877cde25b79..1d23afd32013 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -222,6 +222,12 @@ static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = {
  	.regmap_config = &amlogic_thermal_regmap_config_g12a,
  };
+static const struct amlogic_thermal_data amlogic_thermal_a1_cpu_param = {
+	.u_efuse_off = 0x114,
+	.calibration_parameters = &amlogic_thermal_g12a,
+	.regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
  static const struct of_device_id of_amlogic_thermal_match[] = {
  	{
  		.compatible = "amlogic,g12a-ddr-thermal",
@@ -231,6 +237,10 @@ static const struct of_device_id of_amlogic_thermal_match[] = {
  		.compatible = "amlogic,g12a-cpu-thermal",
  		.data = &amlogic_thermal_g12a_cpu_param,
  	},
+	{
+		.compatible = "amlogic,a1-cpu-thermal",
+		.data = &amlogic_thermal_a1_cpu_param,
+	},
  	{ /* sentinel */ }
  };
  MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Keep it even it you change the compatible,

Thanks,
Neil




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux