This patch must be dropped, i made a mistake. Sorry Patrice On 3/28/24 09:01, patrice.chotard@xxxxxxxxxxx wrote: > From: Patrice Chotard <patrice.chotard@xxxxxxxxxxx> > > On schematics, 2 buttons are available on stm32mp135-dk board: > _ button "user1" connected to GPIOA14 > _ button "user2" connected to GPIOA13 > > Reflect that on device tree. > > Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx> > --- > arch/arm/boot/dts/st/stm32mp135f-dk.dts | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts > index 52171214a308..f7e03bc7eccb 100644 > --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts > +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts > @@ -48,9 +48,15 @@ optee@dd000000 { > gpio-keys { > compatible = "gpio-keys"; > > - button-user { > - label = "User-PA13"; > + button-user-1 { > + label = "User-1"; > linux,code = <BTN_1>; > + gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; > + }; > + > + button-user-2 { > + label = "User-2"; > + linux,code = <BTN_2>; > gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; > }; > };