The FSS bus contains several register ranges. Using an empty ranges property works but causes a DT warning when we give this node an address. Fix this by explicitly defining the memory ranges in use. Signed-off-by: Andrew Davis <afd@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index 77a8d99139ec1..c6d4bf79c1423 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -674,10 +674,13 @@ adc { fss: bus@47000000 { compatible = "simple-bus"; - reg = <0x00 0x47000000 0x00 0x100>; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */ + <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */ + <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */ + <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */ + <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */ ospi0: spi@47040000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; -- 2.39.2