Re: [PATCH 1/3] remoteproc: Add Arm remoteproc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mathieu,

> > > > > > > > > > This is an initial patchset for allowing to turn on and off the remote processor.
> > > > > > > > > > The FW is already loaded before the Corstone-1000 SoC is powered on and this
> > > > > > > > > > is done through the FPGA board bootloader in case of the FPGA target. Or by the Corstone-1000 FVP model
> > > > > > > > > > (emulator).
> > > > > > > > > >
> > > > > > > > > >From the above I take it that booting with a preloaded firmware is a
> > > > > > > > > scenario that needs to be supported and not just a temporary stage.
> > > > > > > >
> > > > > > > > The current status of the Corstone-1000 SoC requires that there is
> > > > > > > > a preloaded firmware for the external core. Preloading is done externally
> > > > > > > > either through the FPGA bootloader or the emulator (FVP) before powering
> > > > > > > > on the SoC.
> > > > > > > >
> > > > > > >
> > > > > > > Ok
> > > > > > >
> > > > > > > > Corstone-1000 will be upgraded in a way that the A core running Linux is able
> > > > > > > > to share memory with the remote core and also being able to access the remote
> > > > > > > > core memory so Linux can copy the firmware to. This HW changes are still
> > > > > > > > This is why this patchset is relying on a preloaded firmware. And it's the step 1
> > > > > > > > of adding remoteproc support for Corstone.
> > > > > > > >
> > > > > > >
> > > > > > > Ok, so there is a HW problem where A core and M core can't see each other's
> > > > > > > memory, preventing the A core from copying the firmware image to the proper
> > > > > > > location.
> > > > > > >
> > > > > > > When the HW is fixed, will there be a need to support scenarios where the
> > > > > > > firmware image has been preloaded into memory?
> > > > > >
> > > > > > No, this scenario won't apply when we get the HW upgrade. No need for an
> > > > > > external entity anymore. The firmware(s) will all be files in the linux filesystem.
> > > > > >
> > > > >
> > > > > Very well.  I am willing to continue with this driver but it does so little that
> > > > > I wonder if it wouldn't simply be better to move forward with upstreaming when
> > > > > the HW is fixed.  The choice is yours.
> > > > >
> > > >
> > > > I think Robin has raised few points that need clarification. I think it was
> > > > done as part of DT binding patch. I share those concerns and I wanted to
> > > > reaching to the same concerns by starting the questions I asked on corstone
> > > > device tree changes.
> > > >
> > >
> > > I also agree with Robin's point of view.  Proceeding with an initial
> > > driver with minimal functionality doesn't preclude having complete
> > > bindings.  But that said and as I pointed out, it might be better to
> > > wait for the HW to be fixed before moving forward.
> >
> > We checked with the HW teams. The missing features will be implemented but
> > this will take time.
> >
> > The foundation driver as it is right now is still valuable for people wanting to
> > know how to power control Corstone external systems in a future proof manner
> > (even in the incomplete state). We prefer to address all the review comments
> > made so it can be merged. This includes making the DT binding as complete as
> > possible as you advised. Then, once the HW is ready, I'll implement the comms
> > and the FW reload part. Is that OK please ?
> >
> 
> I'm in agreement with that plan as long as we agree the current
> preloaded heuristic is temporary and is not a valid long term
> scenario.

Yes, that's the plan, no problem.

Cheers,
Abdellatif




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux