From: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx> The ISP supports both CSI and parallel interfaces, where port 0 corresponds to the former and port 1 corresponds to the latter. Since the i.MX8MP's ISPs are connected by the parallel interface to the CSI receiver, set them both to port 1. Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- Changes since v1: - Fix clock ordering - Add #address-cells and #size-cells to ports nodes --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 50 +++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index bfc5c81a5bd4..1d2670b91b53 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1616,6 +1616,56 @@ isi_in_1: endpoint { }; }; + isp_0: isp@32e10000 { + compatible = "fsl,imx8mp-isp"; + reg = <0x32e10000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "isp", "aclk", "hclk"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; + fsl,blk-ctrl = <&media_blk_ctrl 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + }; + }; + }; + + isp_1: isp@32e20000 { + compatible = "fsl,imx8mp-isp"; + reg = <0x32e20000 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "isp", "aclk", "hclk"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; + fsl,blk-ctrl = <&media_blk_ctrl 1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + }; + }; + }; + dewarp: dwe@32e30000 { compatible = "nxp,imx8mp-dw100"; reg = <0x32e30000 0x10000>; base-commit: 4cece764965020c22cff7665b18a012006359095 -- Regards, Laurent Pinchart