Re: [PATCH v3 04/15] drm: bridge/dw_hdmi: add indentification registers parse and record

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 02/05/2015 11:46 PM, Daniel Kurtz wrote:
On Tue, Feb 3, 2015 at 11:11 PM, Yakir Yang <ykk@xxxxxxxxxxxxxx> wrote:
By parsing the indentification registers we can know what functions
are present on the hdmi ip.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v3:
- Add ID registers parse and record

Changes in v2: None

  drivers/gpu/drm/bridge/dw_hdmi.c | 59 ++++++++++++++++++++++++++++++++++++++++
  drivers/gpu/drm/bridge/dw_hdmi.h | 23 ++++++++++++++++
  2 files changed, 82 insertions(+)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 08f10da..7b5b664 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -79,6 +79,23 @@ static const u16 csc_coeff_rgb_in_eitu709[3][4] = {
         { 0x6756, 0x78ab, 0x2000, 0x0200 }
  };

+struct hdmi_id {
+       u8 design;
+       u8 revision;
+
+       bool prepen;
+       bool audspdif;
+       bool audi2s;
+       bool hdmi14;
+       bool csc;
+       bool hdcp;
+       bool hdmi20;
+       bool confapb;
+       bool ahbauddma;
+       bool gpaud;
+       u8 phy_type;
+};
+
  struct hdmi_vmode {
         bool mdvi;
         bool mhsyncpolarity;
@@ -111,6 +128,8 @@ struct dw_hdmi {
         struct clk *isfr_clk;
         struct clk *iahb_clk;

+       struct hdmi_id id;
+
         struct hdmi_data_info hdmi_data;
         const struct dw_hdmi_plat_data *plat_data;

@@ -1259,6 +1278,36 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
         return 0;
  }

+static void hdmi_parse_id(struct dw_hdmi *hdmi)
+{
+       u8 config0_id, config1_id, config2_id, config3_id;
+
+       config0_id = hdmi_readb(hdmi, HDMI_CONFIG0_ID);
+       config1_id = hdmi_readb(hdmi, HDMI_CONFIG1_ID);
+       config2_id = hdmi_readb(hdmi, HDMI_CONFIG2_ID);
+       config3_id = hdmi_readb(hdmi, HDMI_CONFIG3_ID);
+
+       hdmi->id.prepen = config0_id & HDMI_CONFIG0_ID_PREPEN ? true : false;
These could all be "!!(A & B)", but perhaps that is just a matter of
personal preference.
Okay, "!!(A & B)" looks good, I will modify it.

Thanks.  : )
+       hdmi->id.audi2s = config0_id & HDMI_CONFIG0_ID_AUDI2S ? true : false;
+       hdmi->id.hdmi14 = config0_id & HDMI_CONFIG0_ID_HDMI14 ? true : false;
+       hdmi->id.hdcp = config0_id & HDMI_CONFIG0_ID_HDCP ? true : false;
+       hdmi->id.csc = config0_id & HDMI_CONFIG0_ID_CSC ? true : false;
+       hdmi->id.audspdif = config0_id & HDMI_CONFIG0_ID_AUDSPDIF ?
+                           true : false;
+
+       hdmi->id.confapb = config1_id & HDMI_CONFIG1_ID_CONFAPB ? true : false;
+       hdmi->id.hdmi20 = config1_id & HDMI_CONFIG1_ID_HDMI20 ? true : false;
+
+       hdmi->id.phy_type = config2_id & HDMI_CONFIG2_ID;
HDMI_CONFIG2_ID is a register offset, not a mask.

Thanks, I will correct it.

+
+       hdmi->id.gpaud = config3_id & HDMI_CONFIG3_ID_GPAUD ? true : false;
+       hdmi->id.ahbauddma = config3_id & HDMI_CONFIG3_ID_AHBAUDDMA ?
+                            true : false;
+
+       hdmi->id.design = hdmi_readb(hdmi, HDMI_DESIGN_ID);
+       hdmi->id.revision = hdmi_readb(hdmi, HDMI_REVISION_ID);
+}
+
  /* Wait until we are registered to enable interrupts */
  static int dw_hdmi_fb_registered(struct dw_hdmi *hdmi)
  {
@@ -1670,6 +1719,16 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
                  hdmi_readb(hdmi, HDMI_PRODUCT_ID0),
                  hdmi_readb(hdmi, HDMI_PRODUCT_ID1));

+       /* Config IDs */
+       dev_info(dev,
+                "Detected HDMI config_id 0x%x:0x%x:0x%x:0x%x\n",
+                hdmi_readb(hdmi, HDMI_CONFIG0_ID),
+                hdmi_readb(hdmi, HDMI_CONFIG1_ID),
+                hdmi_readb(hdmi, HDMI_CONFIG2_ID),
+                hdmi_readb(hdmi, HDMI_CONFIG3_ID));
+
+       hdmi_parse_id(hdmi);
It seems a bit silly to read the regs once to print them, and then
again in hdmi_parse_id().
Perhaps move the dev_info() inside hdmi_parse_id().
It would also be nice to print a full summary of all of the parsed fields.
Okay, I will warp them into hdmi_parse_id().

Thanks.  : )

+
         initialize_hdmi_ih_mutes(hdmi);

         ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq,
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.h b/drivers/gpu/drm/bridge/dw_hdmi.h
index 175dbc8..e4ba634 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.h
+++ b/drivers/gpu/drm/bridge/dw_hdmi.h
@@ -545,6 +545,29 @@
  #define HDMI_I2CM_FS_SCL_LCNT_0_ADDR            0x7E12

  enum {
+/* HDMI_CONFIG0_ID */
+       HDMI_CONFIG0_ID_PREPEN = 0x80,
+       HDMI_CONFIG0_ID_AUDSPDIF = 0x20,
+       HDMI_CONFIG0_ID_AUDI2S = 0x10,
+       HDMI_CONFIG0_ID_HDMI14 = 0x08,
+       HDMI_CONFIG0_ID_CSC = 0x04,
+       HDMI_CONFIG0_ID_HDCP = 0x01,
+
+/* HDMI_CONFIG1_ID */
+       HDMI_CONFIG1_ID_HDMI20 = 0x20,
+       HDMI_CONFIG1_ID_CONFAPB = 0x02,
+
+/* HDMI_CONFIG2_ID */
+       HDMI_CONFIG2_ID_PHY_GEN2 = 0xf2,
+       HDMI_CONFIG2_ID_PHY_GEN2_HECA = 0xe2,
+       HDMI_CONFIG2_ID_PHY_HDMI_MHL = 0xc2,
+       HDMI_CONFIG2_ID_PHY_HDMI_MHL_HECA = 0xb2,
+       HDMI_CONFIG2_ID_LEGACY_PHY = 0x00,
+
+/* HDMI_CONFIG3_ID */
+       HDMI_CONFIG3_ID_AHBAUDDMA = 0x02,
+       HDMI_CONFIG3_ID_GPAUD = 0x01,
+
  /* IH_FC_INT2 field values */
         HDMI_IH_FC_INT2_OVERFLOW_MASK = 0x03,
         HDMI_IH_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
--
2.1.2






--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux