CAN instance 0 in the mcu domain is brought on the j721e-sk board through header J1. Thus, add its respective transceiver 1 dt node to add support for this CAN instance. CAN instances 0, 5 and 9 in the main domain are brought on the j721e-sk board through headers J5, J6 and J2 respectively. Thus, add their respective transceivers 2, 3 and 4 dt nodes to add support for these CAN instances. Signed-off-by: Beleswar Padhi <b-padhi@xxxxxx> --- Test logs: https://gist.github.com/3V3RYONE/d60192fa2ccdf523f303e9904fbe8e17 v2: Changelog: 1) Re-ordered status = "okay" property to the end of all applicable dt nodes following kernel documentation Link to v1: https://lore.kernel.org/linux-arm-kernel/20240315124728.490331-1-b-padhi@xxxxxx/ arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 116 +++++++++++++++++++++++++ 1 file changed, 116 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 0c4575ad8d7c..7170f0220afd 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -210,6 +210,42 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 { <3300000 0x1>; }; + transceiver1: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_gpio_pins_default>; + standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>; + }; + + transceiver3: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan5_gpio_pins_default>; + standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>; + }; + + transceiver4: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan9_gpio_pins_default>; + standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>; + }; + dp_pwr_3v3: fixedregulator-dp-prw { compatible = "regulator-fixed"; regulator-name = "dp-pwr"; @@ -367,6 +403,45 @@ J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ >; }; + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ + J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ + >; + }; + + main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */ + >; + }; + + main_mcan5_pins_default: main-mcan5-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */ + J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */ + >; + }; + + main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */ + >; + }; + + main_mcan9_pins_default: main-mcan9-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */ + J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */ + >; + }; + + main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */ + >; + }; + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ @@ -555,6 +630,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ >; }; + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ + J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */ + >; + }; + /* Reset for M.2 M Key slot on PCIe1 */ mkey_reset_pins_default: mkey-reset-pns-default-pins { pinctrl-single,pins = < @@ -1108,6 +1196,34 @@ &pcie1_rc { num-lanes = <2>; }; +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&main_mcan5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan5_pins_default>; + phys = <&transceiver3>; + status = "okay"; +}; + +&main_mcan9 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan9_pins_default>; + phys = <&transceiver4>; + status = "okay"; +}; + &ufs_wrapper { status = "disabled"; }; -- 2.34.1
