[PATCH v7 10/15] ARM: dts: bcm2835-rpi: Move firmware-clocks from bcm2711 to bcm2835

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Raspberry Pi firmware handles clocks on all BCM2835-derived SoCs,
not just on the BCM2711. Move the corresponding DT node from
bcm2711-rpi.dtsi to bcm2835-rpi.dtsi.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 5 -----
 arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index d233a191c139..86188eabeb24 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -20,11 +20,6 @@ aliases {
 };
 
 &firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
-	};
-
 	expgpio: gpio {
 		compatible = "raspberrypi,firmware-gpio";
 		gpio-controller;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
index f0acc9390f31..7e752a66bf8d 100644
--- a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -9,6 +9,11 @@ firmware: firmware {
 
 			mboxes = <&mailbox>;
 			dma-ranges;
+
+			firmware_clocks: clocks {
+				compatible = "raspberrypi,firmware-clocks";
+				#clock-cells = <1>;
+			};
 		};
 
 		power: power {
-- 
Regards,

Laurent Pinchart





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux