On Sat, Mar 23, 2024 at 3:18 PM David Lechner <dlechner@xxxxxxxxxxxx> wrote: ... > Here is what I would consider a reasonably complete binding for the > AD40XX chips (excluding ADAQ for now as I suggested). I missed one... I also think it makes sense for the High-Z mode selection to be a DT property since needing to enable it or disable it depends entirely on what is connected to the analog input pins. --- adi,high-z-input: type: boolean description: High-Z mode allows the amplifier and RC filter in front of the ADC to be chosen based on the signal bandwidth of interest, rather than the settling requirements of the switched capacitor SAR ADC inputs.