[PATCH v3 5/5] regulator: rk808: Add RK816 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for rk816 to the existing rk808 regulator driver.

The infrastructure of the driver can be re-used as is. A peculiarity for
this version is, that BUCK1/BUCK2 have a (common) bit which needs to
toggled after a voltage change to confirm the change. Regulator regmap
takes care of that by defining a apply_bit and apply_reg for those
regulators.

Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
---
changes since v1:
  - align regulator's .name and .of_match with updated binding

changes since v2:
  - align regulator's .name and .of_match with updated binding
    (dropped "-regulator" prefix)

 drivers/regulator/rk808-regulator.c | 202 +++++++++++++++++++++++++++-
 1 file changed, 201 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index a6a563e402d0..14b60abd6afc 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -158,6 +158,11 @@
 	RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,	\
 	_vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops)
 
+#define RK816_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
+	_vmask, _ereg, _emask, _disval, _etime)				\
+	RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,	\
+	_vmask, _ereg, _emask, _emask, _disval, _etime, &rk816_reg_ops)
+
 #define RK817_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
 	_vmask, _ereg, _emask, _disval, _etime)				\
 	RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg,	\
@@ -258,7 +263,7 @@ static const unsigned int rk808_buck1_2_ramp_table[] = {
 	2000, 4000, 6000, 10000
 };
 
-/* RK817 RK809 */
+/* RK817/RK809/RK816 (buck 1/2 only) */
 static const unsigned int rk817_buck1_4_ramp_table[] = {
 	3000, 6300, 12500, 25000
 };
@@ -640,6 +645,38 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 				  rdev->desc->enable_mask);
 }
 
+static const struct rk8xx_register_bit rk816_suspend_bits[] = {
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 0),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 1),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 2),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 3),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 0),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 1),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 2),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 3),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 4),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG2, 5),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 5),
+	RK8XX_REG_BIT(RK818_SLEEP_SET_OFF_REG1, 6),
+};
+
+static int rk816_set_suspend_enable(struct regulator_dev *rdev)
+{
+	int rid = rdev_get_id(rdev);
+
+	return regmap_update_bits(rdev->regmap, rk816_suspend_bits[rid].reg,
+				  rk816_suspend_bits[rid].bit,
+				  rk816_suspend_bits[rid].bit);
+}
+
+static int rk816_set_suspend_disable(struct regulator_dev *rdev)
+{
+	int rid = rdev_get_id(rdev);
+
+	return regmap_update_bits(rdev->regmap, rk816_suspend_bits[rid].reg,
+				  rk816_suspend_bits[rid].bit, 0);
+}
+
 static int rk817_set_suspend_enable_ctrl(struct regulator_dev *rdev,
 					 unsigned int en)
 {
@@ -913,6 +950,54 @@ static const struct regulator_ops rk809_buck5_ops_range = {
 	.set_suspend_disable	= rk817_set_suspend_disable,
 };
 
+static const struct regulator_ops rk816_buck1_2_ops_ranges = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_mode		= rk8xx_set_mode,
+	.get_mode		= rk8xx_get_mode,
+	.set_suspend_mode	= rk8xx_set_suspend_mode,
+	.set_ramp_delay		= regulator_set_ramp_delay_regmap,
+	.set_suspend_voltage	= rk808_set_suspend_voltage_range,
+	.set_suspend_enable	= rk816_set_suspend_enable,
+	.set_suspend_disable	= rk816_set_suspend_disable,
+};
+
+static const struct regulator_ops rk816_buck4_ops_ranges = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_mode		= rk8xx_set_mode,
+	.get_mode		= rk8xx_get_mode,
+	.set_suspend_mode	= rk8xx_set_suspend_mode,
+	.set_suspend_voltage	= rk808_set_suspend_voltage_range,
+	.set_suspend_enable	= rk816_set_suspend_enable,
+	.set_suspend_disable	= rk816_set_suspend_disable,
+};
+
+static const struct regulator_ops rk816_reg_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= rk8xx_is_enabled_wmsk_regmap,
+	.set_suspend_voltage	= rk808_set_suspend_voltage,
+	.set_suspend_enable	= rk816_set_suspend_enable,
+	.set_suspend_disable	= rk816_set_suspend_disable,
+};
+
 static const struct regulator_ops rk817_reg_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
@@ -1392,6 +1477,117 @@ static const struct regulator_desc rk809_reg[] = {
 			  DISABLE_VAL(3)),
 };
 
+static const struct linear_range rk816_buck_4_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(800000, 0, 26, 100000),
+	REGULATOR_LINEAR_RANGE(3500000, 27, 31, 0),
+};
+
+static const struct regulator_desc rk816_reg[] = {
+	{
+		.name = "dcdc1",
+		.supply_name = "vcc1",
+		.of_match = of_match_ptr("dcdc1"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK816_ID_DCDC1,
+		.ops = &rk816_buck1_2_ops_ranges,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 64,
+		.linear_ranges = rk805_buck_1_2_voltage_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
+		.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.apply_reg = RK816_DCDC_EN_REG2,
+		.apply_bit = RK816_BUCK_DVS_CONFIRM,
+		.enable_reg = RK816_DCDC_EN_REG1,
+		.enable_mask = BIT(4) | BIT(0),
+		.enable_val = BIT(4) | BIT(0),
+		.disable_val = BIT(4),
+		.ramp_reg = RK818_BUCK1_CONFIG_REG,
+		.ramp_mask = RK808_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
+		.of_map_mode = rk8xx_regulator_of_map_mode,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "dcdc2",
+		.supply_name = "vcc2",
+		.of_match = of_match_ptr("dcdc2"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK816_ID_DCDC2,
+		.ops = &rk816_buck1_2_ops_ranges,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 64,
+		.linear_ranges = rk805_buck_1_2_voltage_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
+		.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.apply_reg = RK816_DCDC_EN_REG2,
+		.apply_bit = RK816_BUCK_DVS_CONFIRM,
+		.enable_reg = RK816_DCDC_EN_REG1,
+		.enable_mask = BIT(5) | BIT(1),
+		.enable_val = BIT(5) | BIT(1),
+		.disable_val = BIT(5),
+		.ramp_reg = RK818_BUCK2_CONFIG_REG,
+		.ramp_mask = RK808_RAMP_RATE_MASK,
+		.ramp_delay_table = rk817_buck1_4_ramp_table,
+		.n_ramp_values = ARRAY_SIZE(rk817_buck1_4_ramp_table),
+		.of_map_mode = rk8xx_regulator_of_map_mode,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "dcdc3",
+		.supply_name = "vcc3",
+		.of_match = of_match_ptr("dcdc3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK816_ID_DCDC3,
+		.ops = &rk808_switch_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 1,
+		.enable_reg = RK816_DCDC_EN_REG1,
+		.enable_mask = BIT(6) | BIT(2),
+		.enable_val =  BIT(6) | BIT(2),
+		.disable_val = BIT(6),
+		.of_map_mode = rk8xx_regulator_of_map_mode,
+		.owner = THIS_MODULE,
+	}, {
+		.name = "dcdc4",
+		.supply_name = "vcc4",
+		.of_match = of_match_ptr("dcdc4"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK816_ID_DCDC4,
+		.ops = &rk816_buck4_ops_ranges,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 32,
+		.linear_ranges = rk816_buck_4_voltage_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rk816_buck_4_voltage_ranges),
+		.vsel_reg = RK818_BUCK4_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK4_VSEL_MASK,
+		.enable_reg = RK816_DCDC_EN_REG1,
+		.enable_mask = BIT(7) | BIT(3),
+		.enable_val = BIT(7) | BIT(3),
+		.disable_val = BIT(7),
+		.of_map_mode = rk8xx_regulator_of_map_mode,
+		.owner = THIS_MODULE,
+	},
+	RK816_DESC(RK816_ID_LDO1, "ldo1", "vcc5", 800, 3400, 100,
+		   RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+		   RK816_LDO_EN_REG1, ENABLE_MASK(0), DISABLE_VAL(0), 400),
+	RK816_DESC(RK816_ID_LDO2, "ldo2", "vcc5", 800, 3400, 100,
+		   RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+		   RK816_LDO_EN_REG1, ENABLE_MASK(1), DISABLE_VAL(1), 400),
+	RK816_DESC(RK816_ID_LDO3, "ldo3", "vcc5", 800, 3400, 100,
+		   RK818_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+		   RK816_LDO_EN_REG1, ENABLE_MASK(2), DISABLE_VAL(2), 400),
+	RK816_DESC(RK816_ID_LDO4, "ldo4", "vcc6", 800, 3400, 100,
+		   RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+		   RK816_LDO_EN_REG1, ENABLE_MASK(3), DISABLE_VAL(3), 400),
+	RK816_DESC(RK816_ID_LDO5, "ldo5", "vcc6", 800, 3400, 100,
+		   RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+		   RK816_LDO_EN_REG2, ENABLE_MASK(0), DISABLE_VAL(0), 400),
+	RK816_DESC(RK816_ID_LDO6, "ldo6", "vcc6", 800, 3400, 100,
+		   RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+		   RK816_LDO_EN_REG2, ENABLE_MASK(1), DISABLE_VAL(1), 400),
+};
+
 static const struct regulator_desc rk817_reg[] = {
 	{
 		.name = "DCDC_REG1",
@@ -1714,6 +1910,10 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 		regulators = rk809_reg;
 		nregulators = RK809_NUM_REGULATORS;
 		break;
+	case RK816_ID:
+		regulators = rk816_reg;
+		nregulators = ARRAY_SIZE(rk816_reg);
+		break;
 	case RK817_ID:
 		regulators = rk817_reg;
 		nregulators = RK817_NUM_REGULATORS;
-- 
2.43.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux