[PATCH v2 2/2] clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

The RZ/V2H(P) (R9A09G057) SoC is equipped with the Generic Timer Module,
also known as OSTM. Similar to the RZ/G2L SoC, the OSTM on the RZ/V2H(P)
SoC requires the reset line to be deasserted before accessing any
registers.

Early call to ostm_init() happens through TIMER_OF_DECLARE() which always
fails with -EPROBE_DEFER, as resets are not available that early in the
boot process.  To address this issue on the RZ/V2H(P) SoC, enable the OSTM
driver to be reprobed through the platform driver probe mechanism.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2
- Updated commit description
- Dropped usage of IS_ENABLED() and used defined() instead
---
 drivers/clocksource/renesas-ostm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c
index 8da972dc1713..39487d05a009 100644
--- a/drivers/clocksource/renesas-ostm.c
+++ b/drivers/clocksource/renesas-ostm.c
@@ -224,7 +224,7 @@ static int __init ostm_init(struct device_node *np)
 
 TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init);
 
-#ifdef CONFIG_ARCH_RZG2L
+#if defined(CONFIG_ARCH_RZG2L) || defined(CONFIG_ARCH_R9A09G057)
 static int __init ostm_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux