Add the X1E80100 DP descs and compatible. This platform will be using a single compatible for both eDP and DP mode. The actual mode will be set based on the presence of the panel node in DT. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index c9763f77c832..95f6cf949fe6 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -171,6 +171,14 @@ static const struct msm_dp_desc sm8650_dp_descs[] = { {} }; +static const struct msm_dp_desc x1e80100_dp_descs[] = { + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .wide_bus_supported = true }, + { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .wide_bus_supported = true }, + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_supported = true }, + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_supported = true }, + {} +}; + static const struct of_device_id dp_dt_match[] = { { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs }, { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs }, @@ -182,6 +190,7 @@ static const struct of_device_id dp_dt_match[] = { { .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs }, { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs }, { .compatible = "qcom,sm8650-dp", .data = &sm8650_dp_descs }, + { .compatible = "qcom,x1e80100-dp", .data = &x1e80100_dp_descs }, {} }; -- 2.34.1