Convert existing binding to support validation. This is a straightforward conversion with now new properties. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx> --- .../devicetree/bindings/hwmon/ibm,powernv.yaml | 37 ++++++++++++++++++++++ .../devicetree/bindings/hwmon/ibmpowernv.txt | 23 -------------- 2 files changed, 37 insertions(+), 23 deletions(-) diff --git a/Documentation/devicetree/bindings/hwmon/ibm,powernv.yaml b/Documentation/devicetree/bindings/hwmon/ibm,powernv.yaml new file mode 100644 index 000000000000..27c949b94c7b --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,powernv.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ibm,powernv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM POWERNV platform sensors + +maintainers: + - Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx> + +properties: + compatible: + enum: + - ibm,opal-sensor-cooling-fan + - ibm,opal-sensor-amb-temp + - ibm,opal-sensor-power-supply + - ibm,opal-sensor-power + + sensor-id: + description: + An opaque id provided by the firmware to the kernel, identifies a + given sensor and its attribute data. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - sensor-id + +additionalProperties: false + +examples: + - | + sensor { + compatible = "st,stts751"; + sensor-id = <0x7052107>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt deleted file mode 100644 index f93242be60a1..000000000000 --- a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt +++ /dev/null @@ -1,23 +0,0 @@ -IBM POWERNV platform sensors ----------------------------- - -Required node properties: -- compatible: must be one of - "ibm,opal-sensor-cooling-fan" - "ibm,opal-sensor-amb-temp" - "ibm,opal-sensor-power-supply" - "ibm,opal-sensor-power" -- sensor-id: an opaque id provided by the firmware to the kernel, identifies a - given sensor and its attribute data - -Example sensors node: - -cooling-fan#8-data { - sensor-id = <0x7052107>; - compatible = "ibm,opal-sensor-cooling-fan"; -}; - -amb-temp#1-thrs { - sensor-id = <0x5096000>; - compatible = "ibm,opal-sensor-amb-temp"; -}; -- 2.40.1
