On Thu, Feb 05, 2015 at 09:52:55PM +0000, Murali Karicheri wrote: > Fix the dma-range size when the DT attribute is missing. i.e set size to > dev->coherent_dma_mask + 1 instead of dev->coherent_dma_mask. Also add > code to check invalid values of size configured in DT and log error. > > Cc: Joerg Roedel <joro@xxxxxxxxxx> > Cc: Grant Likely <grant.likely@xxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > Cc: Will Deacon <will.deacon@xxxxxxx> > Cc: Russell King <linux@xxxxxxxxxxxxxxxx> > Cc: Arnd Bergmann <arnd@xxxxxxxx> > Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx> > > Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx> > --- > drivers/of/device.c | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/drivers/of/device.c b/drivers/of/device.c > index 2de320d..314c8a9 100644 > --- a/drivers/of/device.c > +++ b/drivers/of/device.c > @@ -105,9 +105,24 @@ void of_dma_configure(struct device *dev, struct device_node *np) > ret = of_dma_get_range(np, &dma_addr, &paddr, &size); > if (ret < 0) { > dma_addr = offset = 0; > - size = dev->coherent_dma_mask; > + size = dev->coherent_dma_mask + 1; > } else { > offset = PFN_DOWN(paddr - dma_addr); > + > + /* > + * Add a work around to treat the size as mask + 1 in case > + * it is defined in DT as a mask. > + */ > + if (size & 1) { > + dev_warn(dev, "Invalid size 0x%llx for dma-range\n", > + size); > + size = size + 1; > + } > + > + if (!size) { > + dev_err(dev, "Adjusted size 0x%llx invalid\n", size); > + return; > + } Would it make sense to set coherent_dma_mask to 0 here to make this more noticeable? It can be done together with the mask calculation from size. -- Catalin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html