[PATCH 2/2] dt-bindings: leds: add LED_FUNCTION_SPEED_* for link speed on LAN/WAN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add LED_FUNCTION_SPEED_LAN and LED_FUNCTION_SPEED_WAN for LEDs that
indicate link speed of ethernet ports on LAN/WAN. This is useful to
distinguish those LEDs from LEDs that indicate link status (up/down).

example:

Fortinet FortiGate 30E/50E have LEDs that indicate link speed on each
of the ethernet ports in addition to LEDs that indicate link status
(up/down).

- 1000 Mbps: green:speed-(lan|wan)-N
-  100 Mbps: amber:speed-(lan|wan)-N
-   10 Mbps: (none, turned off)

Signed-off-by: INAGAKI Hiroshi <musashino.open@xxxxxxxxx>
---
 include/dt-bindings/leds/common.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
index d4b8498bde7f..8d446cf88b4c 100644
--- a/include/dt-bindings/leds/common.h
+++ b/include/dt-bindings/leds/common.h
@@ -96,6 +96,8 @@
 #define LED_FUNCTION_PROGRAMMING "programming"
 #define LED_FUNCTION_RX "rx"
 #define LED_FUNCTION_SD "sd"
+#define LED_FUNCTION_SPEED_LAN "speed-lan"
+#define LED_FUNCTION_SPEED_WAN "speed-wan"
 #define LED_FUNCTION_STANDBY "standby"
 #define LED_FUNCTION_TORCH "torch"
 #define LED_FUNCTION_TX "tx"
-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux