Adding support for Add Banana Pi P2 Zero v1.1 from Sinovoip. V2: Added Fixes: tag to 1/3 to reference the commit which introduced the duplication. Fixed all issues found by dtbs_check, except "cpu-hot-limit" regexp which is there for all H2/H3 boards. Switched back to "usb0_id_det-gpios" for role detection. In one submission Rob suggested this should be replaced with usb connector node. But as I understand the code, connector node approach is currently not supported by the sunxi phy driver. Signed-off-by: Pavel Löbl <pavel@xxxxxxxx> --- Pavel Löbl (3): ARM: dts: sunxi: remove duplicated entries in makefile dt-bindings: arm: sunxi: Add Banana Pi P2 Zero v1.1 ARM: dts: sun8i: h2+: add support for Banana Pi P2 Zero board .../devicetree/bindings/arm/sunxi.yaml | 6 + arch/arm/boot/dts/allwinner/Makefile | 63 +--- .../sun8i-h2-plus-bananapi-p2-zero-v1.1.dts | 287 ++++++++++++++++++ 3 files changed, 294 insertions(+), 62 deletions(-) create mode 100644 arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-p2-zero-v1.1.dts -- 2.39.2