On 11/03/2024 23:55, Krzysztof Kozlowski wrote:
On 11/03/2024 12:13, Chanh Nguyen wrote:
Add a device tree bindings for max31790 device.
Subject: drop "driver", bindings are about hardware.
Yes, I'll drop "driver" at v2 updating.
It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.
I tested the binding, I didn't see any warning/error log. Please review
my logs as below
=> make dt_binding_check DT_SCHEMA_FILES=/hwmon/max31790.yaml
make[1]: Entering directory '/DISK4T/work/community/linux/out'
DTEX Documentation/devicetree/bindings/hwmon/max31790.example.dts
DTC_CHK Documentation/devicetree/bindings/hwmon/max31790.example.dtb
make[1]: Leaving directory '/DISK4T/work/community/linux/out'
Signed-off-by: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/hwmon/max31790.yaml | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/max31790.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/max31790.yaml b/Documentation/devicetree/bindings/hwmon/max31790.yaml
new file mode 100644
index 000000000000..5a93e6bdebda
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/max31790.yaml
Filename like compatible.
Yes, I'll update that in v2
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/max31790.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Maxim MAX31790 Fan Controller
+
+maintainers:
+ - Jean Delvare <jdelvare@xxxxxxxx>
+ - Guenter Roeck <linux@xxxxxxxxxxxx>
You should have here someone responsible for hardware, not subsystem
maintainers.
Hi Krzysztof,
I checked the history of the drivers/hwmon/max31790.c and see Guenter
Roeck <linux@xxxxxxxxxxxx> as an important maintainer. I saw many
commits from him. So, I add him to maintainer list.
+
+description: >
+ The MAX31790 controls the speeds of up to six fans using six
+ independent PWM outputs. The desired fan speeds (or PWM duty cycles)
+ are written through the I2C interface.
+
+ Datasheets:
+ https://datasheets.maximintegrated.com/en/ds/MAX31790.pdf
+
+properties:
+ compatible:
+ const: maxim,max31790
+
+ reg:
+ maxItems: 1
That's weirdly empty.
Hi Krzysztof,
I have not yet understood your comment here. Please help give more
details for my missing! Thank Krzysztof!
+
+required:
+ - compatible
+ - reg
+
You miss allOf: with $ref to fan controller schema.
Thank Krzysztof,
I'll add the allOf at v2.
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ max31790@20 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
I suggest some node names, such as "i2c-fan" or "fan-controller" . Can
you please share your ideas with me!
Best regards,
Krzysztof
