Re: [PATCH] arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/13/2024 3:57 PM, Paweł Owoc wrote:
gpio16 will only be used for LCD support, as its NAND/LCDC data[8]
so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8
or 16-bit with only 8-bit one being supported in our case so that pin
is unused.

It should be dropped from the default NAND pinctrl configuration
as its unused and only needed for LCD.


Matches with downstream.

Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>



Signed-off-by: Paweł Owoc <frut3k7@xxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index e5b89753aa5c..8bed34174460 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -349,7 +349,7 @@ qpic_pins: qpic-state {
  				       "gpio5", "gpio6", "gpio7",
  				       "gpio8", "gpio10", "gpio11",
  				       "gpio12", "gpio13", "gpio14",
-				       "gpio15", "gpio16", "gpio17";
+				       "gpio15", "gpio17";
  				function = "qpic";
  				drive-strength = <8>;
  				bias-disable;




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux