On Wed, Mar 13, 2024 at 10:49:20AM +0100, Julien Massot wrote: > Add DT bindings for Maxim MAX96714 GMSL2 Deserializer. > > Signed-off-by: Julien Massot <julien.massot@xxxxxxxxxxxxx> > --- > Change since v4: > - Add compatible for MAX96714 and use it as a fallback for MAX96714F > - Remove extra '|' for decriptions > - Reference 'i2c-gate' instead of 'i2c-controller' > > Change since v3: > - Renamed file to maxim,max96714.yaml dropped the 'f' suffix > - Removed mention to C-PHY since it's not supported by MAX96714 deserializers > - Removed bus-type requirement on CSI endpoint since the device only support D-PHY > - Removed the clock-lanes property in the dt example > > Change since v2: > - remove reg description > - rename enable gpio to powerdown > - use generic node name: i2c, serializer, deserializer > --- > .../bindings/media/i2c/maxim,max96714.yaml | 176 ++++++++++++++++++ > 1 file changed, 176 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml > new file mode 100644 > index 000000000000..59b116092834 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml > @@ -0,0 +1,176 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2024 Collabora Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/maxim,max96714.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim MAX96714 GMSL2 to CSI-2 Deserializer > + > +maintainers: > + - Julien Massot <julien.massot@xxxxxxxxxxxxx> > + > +description: > + The MAX96714 deserializer converts GMSL2 serial inputs into MIPI > + CSI-2 D-PHY formatted output. The device allows the GMSL2 link to > + simultaneously transmit bidirectional control-channel data while forward > + video transmissions are in progress. The MAX96714 can connect to one > + remotely located serializer using industry-standard coax or STP > + interconnects. The device cans operate in pixel or tunnel mode. In pixel mode > + the MAX96714 can select individual video stream, while the tunnel mode forward all > + the MIPI data received by the serializer. > + > + The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the > + forward direction and 187.5Mbps in the reverse direction. > + MAX96714F only supports a fixed rate of 3Gbps in the forward direction. > + > +properties: > + compatible: > + oneOf: > + - enum: > + - maxim,max96714 There's only once device here, make it const rather than enum. > + - items: > + - enum: > + - maxim,max96714f > + - const: maxim,max96714 # fallback for 'f' variant Drop the comment btw, it doesn't make sense given you have an enum that will allow for more devices and it being a fallback is obvious. That said, given what you told me on the last version | Yes there are a few differences visible to the software, for example the | GMSL | link rate since MAX96714 support 6 and 3 Gbps, while MAX96714F only | supports 3Gbps. | the registers map is the same, but a few values are not possible with | the 'f' version. I don't think your ordering here is correct. The 96714 should fall back to the 96714f, not the opposite that you have here, as the f is the version which supports fewer features. I think this should be: oneOf: - const: maxim,max96714f - items: - enum: - maxim,max96714 - const: maxim,max96714f Cheers, Conor. > + > + reg: > + maxItems: 1 > + > + powerdown-gpios: > + maxItems: 1 > + description: > + Specifier for the GPIO connected to the PWDNB pin. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + unevaluatedProperties: false > + description: GMSL Input > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + description: > + Endpoint for GMSL2-Link port. > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI-2 Output port > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + lane-polarities: > + minItems: 1 > + maxItems: 5 > + > + link-frequencies: > + maxItems: 1 > + > + required: > + - data-lanes > + > + required: > + - port@1 > + > + i2c-gate: > + $ref: /schemas/i2c/i2c-gate.yaml > + unevaluatedProperties: false > + description: > + The MAX96714 will pass through and forward the I2C requests from the > + incoming I2C bus over the GMSL2 link. Therefore it supports an i2c-gate > + subnode to configure a serializer. > + > + port0-poc-supply: > + description: Regulator providing Power over Coax for the GMSL port > + > +required: > + - compatible > + - reg > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/media/video-interfaces.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + deserializer@28 { > + compatible = "maxim,max96714f", "maxim,max96714"; > + reg = <0x28>; > + powerdown-gpios = <&main_gpio0 37 GPIO_ACTIVE_LOW>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + max96714_gmsl_in: endpoint { > + remote-endpoint = <&max96917f_gmsl_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + max96714_csi_out: endpoint { > + data-lanes = <1 2 3 4>; > + link-frequencies = /bits/ 64 <400000000>; > + remote-endpoint = <&csi_in>; > + }; > + }; > + }; > + > + i2c-gate { > + #address-cells = <1>; > + #size-cells = <0>; > + > + serializer@40 { > + compatible = "maxim,max96717f", "maxim,max96717"; > + reg = <0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + #clock-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + max96717f_csi_in: endpoint { > + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; > + data-lanes = <1 2>; > + lane-polarities = <1 0 1>; > + remote-endpoint = <&sensor_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + max96917f_gmsl_out: endpoint { > + remote-endpoint = <&max96714_gmsl_in>; > + }; > + }; > + }; > + }; > + }; > + }; > + }; > +... > -- > 2.44.0 >
Attachment:
signature.asc
Description: PGP signature