Convert the binding for McBSP controllers for TI SoCs from txt to YAML schema. Add properties 'clocks', 'clock-names', 'power-domains' and '#sound-dai-cells' which were missing from the txt file. Add '#sound-dai-cells' and 'clocks' in the example which were missing from the txt file. Signed-off-by: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx> --- .../bindings/sound/davinci-mcbsp.txt | 50 ---------- .../bindings/sound/davinci-mcbsp.yaml | 96 +++++++++++++++++++ 2 files changed, 96 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.txt create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt deleted file mode 100644 index 3ffc2562fb31..000000000000 --- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt +++ /dev/null @@ -1,50 +0,0 @@ -Texas Instruments DaVinci McBSP module -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -This binding describes the "Multi-channel Buffered Serial Port" (McBSP) -audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x. - - -Required properties: -~~~~~~~~~~~~~~~~~~~~ -- compatible : - "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms - -- reg : physical base address and length of the controller memory mapped - region(s). -- reg-names : Should contain: - * "mpu" for the main registers (required). - * "dat" for the data FIFO (optional). - -- dmas: three element list of DMA controller phandles, DMA request line and - TC channel ordered triplets. -- dma-names: identifier string for each DMA request line in the dmas property. - These strings correspond 1:1 with the ordered pairs in dmas. The dma - identifiers must be "rx" and "tx". - -Optional properties: -~~~~~~~~~~~~~~~~~~~~ -- interrupts : Interrupt numbers for McBSP -- interrupt-names : Known interrupt names are "rx" and "tx" - -- pinctrl-0: Should specify pin control group used for this controller. -- pinctrl-names: Should contain only one value - "default", for more details - please refer to pinctrl-bindings.txt - -Example (AM1808): -~~~~~~~~~~~~~~~~~ - -mcbsp0: mcbsp@1d10000 { - compatible = "ti,da850-mcbsp"; - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp0_pins>; - - reg = <0x00110000 0x1000>, - <0x00310000 0x1000>; - reg-names = "mpu", "dat"; - interrupts = <97 98>; - interrupt-names = "rx", "tx"; - dmas = <&edma0 3 1 - &edma0 2 1>; - dma-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml b/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml new file mode 100644 index 000000000000..8b0e9b5da08f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/davinci-mcbsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: McBSP Controller for TI SoCs + +maintainers: + - Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - ti,da850-mcbsp + + reg: + minItems: 1 + items: + - description: CFG registers + - description: data registers + + reg-names: + minItems: 1 + items: + - const: mpu + - const: dat + + dmas: + items: + - description: transmission DMA channel + - description: reception DMA channel + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + items: + - description: RX interrupt + - description: TX interrupt + + interrupt-names: + items: + - const: rx + - const: tx + + clocks: + items: + - description: functional clock + + clock-names: + items: + - const: fck + + power-domains: + description: phandle to the corresponding power-domain + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - "#sound-dai-cells" + - compatible + - reg + - reg-names + - dmas + - dma-names + - clocks + +unevaluatedProperties: false + +examples: + - | + mcbsp0: mcbsp0@1d10000 { + #sound-dai-cells = <0>; + compatible = "ti,da850-mcbsp"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp0_pins>; + + reg = <0x111000 0x1000>, + <0x311000 0x1000>; + reg-names = "mpu", "dat"; + interrupts = <97>, <98>; + interrupt-names = "rx", "tx"; + dmas = <&edma0 3 1 + &edma0 2 1>; + dma-names = "tx", "rx"; + + clocks = <&psc1 14>; + }; -- 2.43.2