Update the minimum voltage from 300000 uV to 400000 uV so it matches the MT6315 datasheet. Also update the minimum voltage for Vgpu regulator from 606250 uV to 400000 uV because the requested voltage could be lower than the minimum voltage on the GPU OPP table when the MTK Smart Voltage Scaling (SVS) driver is enabled. Fixes: 3183cb62b033 ("arm64: dts: mediatek: asurada: Add SPMI regulators") Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx> --- Changes in v2: - Change the value to 400000 and update other mt6315 usages arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 43d80334610a..2eafe66fbb8a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -1421,7 +1421,7 @@ regulators { mt6315_6_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vbcpu"; - regulator-min-microvolt = <300000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; @@ -1431,7 +1431,7 @@ mt6315_6_vbuck1: vbuck1 { mt6315_6_vbuck3: vbuck3 { regulator-compatible = "vbuck3"; regulator-name = "Vlcpu"; - regulator-min-microvolt = <300000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; @@ -1448,7 +1448,7 @@ regulators { mt6315_7_vbuck1: vbuck1 { regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; - regulator-min-microvolt = <606250>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <800000>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; -- 2.44.0.291.gc1ea87d7ee-goog