Hi Addy, Am Donnerstag, 5. Februar 2015, 19:06:59 schrieb Addy Ke: > Signed-off-by: Addy Ke <addy.ke@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/mmc/mmc.txt | 11 +++++++++++ > drivers/mmc/core/host.c | 2 ++ > 2 files changed, 13 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt > b/Documentation/devicetree/bindings/mmc/mmc.txt index 438899e..303b448 > 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc.txt > +++ b/Documentation/devicetree/bindings/mmc/mmc.txt > @@ -40,9 +40,20 @@ Optional properties: > - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported > - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported > - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported > +- runtime-resume: resume at runtime_resume is supported > - dsr: Value the card's (optional) Driver Stage Register (DSR) should be > programmed with. Valid range: [0 .. 0xffff]. > > +Card power and reset control: > +The following properties can be specified for cases where the MMC > +peripheral needs additional reset, regulator and clock lines. It is for > +example common for WiFi/BT adapters to have these separate from the main > +MMC bus: > + - card-reset-gpios: Specify GPIOs for card reset (reset active low) > + - card-external-vcc-supply: Regulator to drive (independent) card VCC > + - clock with name "card_ext_clock": External clock provided to the card > +>>>>>>> 0064e63... FROMLIST: mmc: core: add runtime-resume caps to support you seem to have missed some merge artifacts here because your patch should probably only insert the one runtime-resume line above. Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html