[PATCH v2 2/2] ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Adam Honse <calcprogrammer1@xxxxxxxxx>

Add the devicetree for this "phablet" using the Snapdragon 800 SoC.

Signed-off-by: Adam Honse <calcprogrammer1@xxxxxxxxx>
[luca@xxxxxxxxx: clean up, prepare for upstream]
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
 arch/arm/boot/dts/qcom/Makefile                    |   1 +
 .../boot/dts/qcom/qcom-msm8974-samsung-hlte.dts    | 401 +++++++++++++++++++++
 2 files changed, 402 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 9cc1e14e6cd0..845af12d15a2 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8960-samsung-expressatt.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
+	qcom-msm8974-samsung-hlte.dtb \
 	qcom-msm8974-sony-xperia-rhine-amami.dtb \
 	qcom-msm8974-sony-xperia-rhine-honami.dtb \
 	qcom-msm8974pro-fairphone-fp2.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
new file mode 100644
index 000000000000..903bb4d12513
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Samsung Galaxy Note 3";
+	compatible = "samsung,hlte", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC3 SD card slot */
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_pin_a>;
+		pinctrl-names = "default";
+
+		key-home {
+			label = "Home Key";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	touch_ldo: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "touch-ldo";
+
+		gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+
+		pinctrl-0 = <&touch_ldo_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pm8941_gpios>;
+		interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8941_l10>;
+		vio-supply = <&touch_ldo>;
+
+		pinctrl-0 = <&touch_pin>;
+		pinctrl-names = "default";
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pm8941_gpios>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio26";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio30";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	touch_ldo_pin: touchscreen-ldo-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <815000>;
+			regulator-max-microvolt = <900000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&sdhc1_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l21>;
+
+	pinctrl-0 = <&sdhc3_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tlmm {
+	sdhc1_pin_a: sdhc1-pin-active-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdhc3_pin_a: sdhc3-pin-active-state {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+	status = "okay";
+};

-- 
2.44.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux