This series adds device-tree nodes for CPSW2G and CPSW9G instance of the CPSW Ethernet Switch on TI's J784S4 SoC. Additionally, two device-tree overlays are also added: 1. QSGMII mode with the CPSW9G instance via the ENET EXPANSION 1 connector. 2. USXGMII mode with MAC Ports 1 and 2 of the CPSW9G instance via ENET EXPANSION 1 and 2 connectors, configured in fixed-link mode of operation at 5Gbps link speed. Link to v4: https://lore.kernel.org/r/20240131101441.1362409-1-c-vankar@xxxxxx/ Changes from v4 to v5: 1. Removed Patch at: https://lore.kernel.org/r/20240131101441.1362409-2-c-vankar@xxxxxx/ from this version as it is posted as a separate patch at: https://lore.kernel.org/r/20240213080348.248916-1-s-vadapalli@xxxxxx/ 2. Disabled node "main_cpsw1_mdio" in k3-j784s4-main.dtsi and enabled it in k3-j784s4-evm.dts. Chintan Vankar (1): arm64: dts: ti: k3-j784s4-evm: Add alias for MCU CPSW2G Siddharth Vadapalli (4): arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes arm64: dts: ti: k3-j784s4-evm: Enable Main CPSW2G node and add aliases for it arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with CPSW9G arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode arch/arm64/boot/dts/ti/Makefile | 11 +- .../ti/k3-j784s4-evm-quad-port-eth-exp1.dtso | 147 ++++++++++++++ .../ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso | 81 ++++++++ arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 51 +++++ arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 187 ++++++++++++++++++ 5 files changed, 476 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso -- 2.34.1