On 26/02/2024 16:25, AngeloGioacchino Del Regno wrote:
+ if (enable) {
+ /* set gpio mosi mode */
+ regmap_write(priv->regmap, MT6357_GPIO_MODE2_CLR,
GPIO_MODE2_CLEAR_ALL);
+ regmap_write(priv->regmap, MT6357_GPIO_MODE2_SET,
GPIO8_MODE_SET_AUD_CLK_MOSI |
+ GPIO9_MODE_SET_AUD_DAT_MOSI0 |
+ GPIO10_MODE_SET_AUD_DAT_MOSI1 |
+ GPIO11_MODE_SET_AUD_SYNC_MOSI);
Are you sure that you need to write to MODE2_SET *and* to MODE2?!
This is downstream code and these registers aren't in my documentation.
I've removed the MODE2_SET write and test the audio: it's still working.
So I will keep the spurious write removed for v2. :)
--
Regards,
Alexandre
