Re: [PATCH 1/2] driver core: Clear FWNODE_FLAG_NOT_DEVICE when a device is added

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Saravana,

On Tue, 20 Feb 2024 18:41:03 -0800
Saravana Kannan <saravanak@xxxxxxxxxx> wrote:

> On Tue, Feb 20, 2024 at 3:10 AM Herve Codina <herve.codina@xxxxxxxxxxx> wrote:
> >
> > Since commit 1a50d9403fb9 ("treewide: Fix probing of devices in DT
> > overlays"), when using device-tree overlays, the FWNODE_FLAG_NOT_DEVICE
> > is set on each overlay nodes.
> > When an overlay contains a node related to a bus (i2c for instance)
> > and its children nodes representing i2c devices, the flag is cleared for
> > the bus node by the OF notifier but the "standard" probe sequence takes
> > place (the same one is performed without an overlay) for the bus and
> > children devices are created simply by walking the children DT nodes
> > without clearing the FWNODE_FLAG_NOT_DEVICE flag for these devices.
> >
> > Clear the FWNODE_FLAG_NOT_DEVICE when the device is added, no matter if
> > an overlay is used or not.
> >
> > Fixes: 1a50d9403fb9 ("treewide: Fix probing of devices in DT overlays")
> > Cc: <stable@xxxxxxxxxxxxxxx>
> > Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
> > ---
> >  drivers/base/core.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/base/core.c b/drivers/base/core.c
> > index 14d46af40f9a..61d09ac57bfb 100644
> > --- a/drivers/base/core.c
> > +++ b/drivers/base/core.c
> > @@ -3619,6 +3619,7 @@ int device_add(struct device *dev)
> >          */
> >         if (dev->fwnode && !dev->fwnode->dev) {
> >                 dev->fwnode->dev = dev;
> > +               dev->fwnode->flags &= ~FWNODE_FLAG_NOT_DEVICE;
> >                 fw_devlink_link_device(dev);
> >         }  
> 
> Temporary Nack on this. I think depending on how we address patch 2/2
> this patch might not be necessary.
> 
> Also, I'd ideally prefer this gets cleared before the device is added,
> but it's a position that I'd be willing to change.
> 

Some more information about this current patch.

Several month ago, I sent a patch related to a warning raised during driver
unbinding [1]. This warning was raised by __device_links_no_driver() because
we unlink a consumer while its supplier links.status is DL_DEV_UNBINDING.
You suspected an issue with the device removal ordering.

On this system, I applied this current patch clearing FWNODE_FLAG_NOT_DEVICE
in device_add(). This fixes the warning described in [1].

[1]: https://lore.kernel.org/linux-kernel/CAGETcx-Mp0uKBF_BWFFBUm=eVOp8xhxF3+znFB8vTaFwpJWTnw@xxxxxxxxxxxxxx/


The use case on that system, involved DT overlays and the fragment applied is the
following:
--- 8< ---
   pci-ep-bus@0 {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;

	/*
	 * map @0xe2000000 (32MB) to BAR0 (CPU)
	 * map @0xe0000000 (16MB) to BAR1 (AMBA)
	 */
	ranges = <0xe2000000 0x00 0x00 0x00 0x2000000
	          0xe0000000 0x01 0x00 0x00 0x1000000>;

	...

	flx0: flexcom@e0040000 {
		compatible = "atmel,sama5d2-flexcom";
		reg = <0xe0040000 0x100>;
		clocks = <&clks GCK_ID_FLEXCOM0>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0xe0040000 0x800>;

		atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;

		i2c_lan966x: i2c@600 {
			compatible = "microchip,lan966x-i2c";
			reg = <0x600 0x200>;
			interrupt-parent = <&itc>;
			interrupts = <48>;
			#address-cells = <1>;
			#size-cells = <0>;
			clocks = <&clks GCK_ID_FLEXCOM0>;
			assigned-clocks = <&clks GCK_ID_FLEXCOM0>;
			assigned-clock-rates = <20000000>;
			pinctrl-0 = <&fc0_a_pins>;
			pinctrl-names = "default";
			i2c-analog-filter;
			i2c-digital-filter;
			i2c-digital-filter-width-ns = <35>;
		};
	};
	...
   };
--- 8< ---
This fragment is applied to a PCI device node.

Without clearing the FWNODE_FLAG_NOT_DEVICE, a link is present between the
i2c@600 and the PCI device. With the flag cleared, this link is replaced by
a link between the i2c@600 and the pci-ep-bus. Which looks better.

The flexcom driver is a MFD driver. As a MFD driver, it simply calls
devm_of_platform_populate(). In this path, devices are created and added but
nothing cleared the FWNODE_FLAG_NOT_DEVICE.

Based on your remark "I'd ideally prefer this gets cleared before the device
is added", I have the feeling that all calls to device_add() should clear the
flag before calling device_add(). So having FWNODE_FLAG_NOT_DEVICE cleared
in device_add() itself in that case makes sense.

What is your opinion ?

Also, feel free to ask for some more traces and/or logs if needed.

Best regards,
Hervé
-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux