[PATCH 3/4] arm64: dts: zynqmp: Add DMA for DP audio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the two DMA channels used for the DisplayPort audio to the
zynqmp_dpsub node.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index eaba466804bc..811d80cbf4c5 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -1036,11 +1036,14 @@ zynqmp_dpsub: display@fd4a0000 {
 				      "dp_vtc_pixel_clk_in";
 			power-domains = <&zynqmp_firmware PD_DP>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
-			dma-names = "vid0", "vid1", "vid2", "gfx0";
+			dma-names = "vid0", "vid1", "vid2", "gfx0",
+				    "aud0", "aud1";
 			dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
 			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
 			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
-			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO0>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO1>;
 
 			ports {
 				#address-cells = <1>;

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux