[PATCH v3 2/2] dt-bindings: pinctrl: qcom: update functions to match with driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some functions were consolidated in the SM4450 pinctrl driver, but they
had not been updated in the binding file before the previous SM4450
pinctrl patch series was merged.
Update functions in this binding file to match with SM4450 pinctrl
driver. Some functions need to be consolidated and some functions need
to be removed.
The following functions are removed:
  - atest_char0, atest_char1, atest_char2, atest_char3
  - atest_usb00, atest_usb01, atest_usb02, atest_usb03
  - audio_ref
  - cci_async
  - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4
  - cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3
  - coex_uart1
  - cri_trng0, cri_trng1
  - dbg_out
  - ddr_pxi0, ddr_pxi1
  - dp0_hot
  - gcc_gp1, gcc_gp2, gcc_gp3
  - ibi_i3c
  - jitter_bist
  - mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3
  - mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0,
    mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1
  - nav_gpio0, nav_gpio1, nav_gpio2
  - phase_flag0, phase_flag1, phase_flag10, phase_flag11, phase_flag12,
    phase_flag13, phase_flag14, phase_flag15, phase_flag16,
    phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
    phase_flag21, phase_flag22, phase_flag23, phase_flag24,
    phase_flag25, phase_flag26, phase_flag27, phase_flag28,
    phase_flag29, phase_flag3, phase_flag30, phase_flag31, phase_flag4,
    phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9
  - pll_bist, pll_clk
  - prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3
  - qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12,
    qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, qdss_gpio3,
    qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8,
    qdss_gpio9
  - qlink0_wmss
  - qup0_se5, qup0_se6, qup0_se7, qup1_se5, qup1_se6
  - sd_write
  - tb_trig
  - tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3
  - tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3
  - tsense_pwm1, tsense_pwm2
  - uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
    uim1_present, uim1_reset
  - usb0_hs, usb0_phy
  - vsense_trigger

The following functions are added:
  - atest_char
  - atest_usb0
  - audio_ref_clk
  - cci
  - cci_async_in0
  - cmu_rng
  - coex_uart1_rx, coex_uart1_tx
  - dbg_out_clk
  - ddr_pxi0_test, ddr_pxi1_test
  - gcc_gp1_clk, gcc_gp2_clk, gcc_gp3_clk
  - ibi_i3c_qup0, ibi_i3c_qup1
  - jitter_bist_ref
  - mdp_vsync
  - nav
  - phase_flag
  - pll_bist_sync, pll_clk_aux
  - prng_rosc
  - qlink0_wmss_reset
  - sd_write_protect
  - tb_trig_sdc1, tb_trig_sdc2
  - tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, tgu_ch3_trigout
  - tmess_prng
  - tsense_pwm1_out, tsense_pwm2_out
  - uim0, uim1
  - usb0_hs_ac, usb0_phy_ps
  - vsense_trigger_mirnat
  - wlan1_adc_dtest0, wlan1_adc_dtest1

Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
 .../bindings/pinctrl/qcom,sm4450-tlmm.yaml    | 52 +++++++------------
 1 file changed, 18 insertions(+), 34 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb675c8ec220..1b941b276b3f 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -72,40 +72,24 @@ $defs:
         description:
           Specify the alternative function to be configured for the specified
           pins.
-        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
-                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
-                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
-                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-                cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
-                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
-                dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
-                jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
-                mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
-                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
-                mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
-                phase_flag0, phase_flag1, phase_flag10, phase_flag11,
-                phase_flag12, phase_flag13, phase_flag14, phase_flag15,
-                phase_flag16, phase_flag17, phase_flag18, phase_flag19,
-                phase_flag2, phase_flag20, phase_flag21, phase_flag22,
-                phase_flag23, phase_flag24, phase_flag25, phase_flag26,
-                phase_flag27, phase_flag28, phase_flag29, phase_flag3,
-                phase_flag30, phase_flag31, phase_flag4, phase_flag5,
-                phase_flag6, phase_flag7, phase_flag8, phase_flag9,
-                pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
-                prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
-                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
-                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
-                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
-                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
-                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
-                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
-                qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
-                qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
-                tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
-                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
-                uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
-                uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
-                vsense_trigger ]
+        enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+                cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+                coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+                ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+                gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+                jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+                mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+                pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+                prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+                qlink0_enable, qlink0_request, qlink0_wmss_reset,
+                qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+                qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+                qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+                tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+                tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+                vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat,
+                wlan1_adc_dtest0, wlan1_adc_dtest1 ]
 
         required:
           - pins
-- 
2.17.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux