This series fixes the LED support for rtl8366. The existing code was not tested in a device with switch LEDs and it was using a flawed logic. The driver now keeps the default LED configuration if nothing requests a different behavior. This may be enough for most devices. This can be achieved either by omitting the LED from the device-tree or configuring all LEDs in a group with the default state set to "keep". The hardware trigger for LEDs in Realtek switches is shared among all LEDs in a group. This behavior doesn't align well with the Linux LED API, which controls LEDs individually. Once the OS changes the brightness of a LED in a group still triggered by the hardware, the entire group switches to software-controlled LEDs. This shared behavior also prevents offloading the trigger to the hardware as it would require an orchestration between LEDs in a group, not currently present in the LED API. The assertion of device hardware reset during driver removal was removed because it was causing an issue with the LED release code. Devres devices are released after the driver's removal is executed. Asserting the reset at that point was causing timeout errors during LED release when it attempted to turn off the LED. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx> --- Changes in v1: - Rebased on new relatek DSA drivers - Improved commit messages - Added commit to remove the reset assert during .remove - Link to RFC: https://lore.kernel.org/r/20240106184651.3665-1-luizluca@xxxxxxxxx --- Luiz Angelo Daros de Luca (4): dt-bindings: net: dsa: realtek: describe LED usage net: dsa: realtek: keep default LED state in rtl8366rb net: dsa: realtek: do not assert reset on remove net: dsa: realtek: add LED drivers for rtl8366rb .../devicetree/bindings/net/dsa/realtek.yaml | 46 +++ drivers/net/dsa/realtek/rtl8366rb.c | 341 ++++++++++++++++----- drivers/net/dsa/realtek/rtl83xx.c | 7 +- 3 files changed, 306 insertions(+), 88 deletions(-) --- base-commit: d7e14e534493328cc5f67baaff2b0c23d32b0a57 change-id: 20240212-realtek-led-a665ae39a9c5 Best regards, -- Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx>