On Fri, Mar 08, 2024 at 02:11:34PM -0500, Frank Li wrote: > On Fri, Mar 08, 2024 at 02:01:29PM -0500, Frank Li wrote: > > On Fri, Mar 08, 2024 at 12:11:03PM -0600, Rob Herring wrote: > > > On Fri, Mar 08, 2024 at 10:30:51AM -0500, Frank Li wrote: > > > > fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms > > > > have 1 interrupt. > > > > > > > > Increase max interrupt number to 2 and add restriction for platforms except > > > > i.MX8QXP and i.MX8QM. > > > > > > > > Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > > > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > > > > --- > > > > .../devicetree/bindings/sound/fsl,spdif.yaml | 21 ++++++++++++++++++++- > > > > 1 file changed, 20 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > > index 56f8c0c8afdea..a242f68f99f18 100644 > > > > --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > > +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > > @@ -31,7 +31,11 @@ properties: > > > > maxItems: 1 > > > > > > > > interrupts: > > > > - maxItems: 1 > > > > + minItems: 1 > > > > + maxItems: 2 > > > > + items: > > > > + - description: Combined or receive interrupt > > > > + - description: Transmit interrupt > > > > > > Test your patches please because this will have warnings. Or, you can > > > put in *exactly* what I provided because this is not it. > > > > > > If you continue to just toss crap at us at the rate you are, the DT > > > maintainers will either just start ignoring your patches or require some > > > trusted review by another NXP colleague first (offhand, not sure who > > > that would be which is part of the problem). > > > > Sorry, I run wrong command to check another dtb file. So have not catch > > this problem. > > Strange when I run second time, spdif warning disappeared. > > make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 CHECK_DTBS=y freescale/imx8dxl-evk.dtb > DTC_CHK arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: /: fixedregulator@101: 'anyOf' conditional failed, one must be fixed: > 'reg' is a required property > 'ranges' is a required property > from schema $id: http://devicetree.org/schemas/root-node.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@34000000: clock-cm40-ipg: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[132000000]], 'clock-output-names': ['cm40_ipg_clk'], 'phandle': [[15]]} should not be valid under {'type': 'object'} > from schema $id: http://devicetree.org/schemas/simple-bus.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: intmux@37400000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a070000: Unevaluated properties are not allowed ('resets' was unexpected) > from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@5b000000: clock-conn-bch: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[400000000]], 'clock-output-names': ['conn_bch_clk']} should not be valid under {'type': 'object'} > from schema $id: http://devicetree.org/schemas/simple-bus.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: $nodename:0: 'dma-apbh@5b810000' does not match '^dma-controller(@.*)?$' > from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: 'clock-names', 'interrupt-names', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# > I figured out what's happen. CHECK_DTB will check binding doc except example part. So I skip run dt_binding_check when I have not touch example part in dt-binding doc. The problem is step 1. run make CHECK_DTB=y freescale/imx8ulp-evk.dtb Then I get some sai error, I found use wrong 8ulp-evk.dtb step 2. run make CHECK_DTBS=y freescale/imx8dxl-evk.dtb Then tools not check dt_binding file again even there are warning. Do you have option let CHECK_DTBS to force check binding doc every time. Frank > > > > > > Frank > > > > > > > > Rob
