From: Paul Burton <paul.burton@xxxxxxxxxx>
Introduce a driver suitable for use with the UARTs present in
Ingenic jz47xx series SoCs. These are described as being ns16550
compatible but aren't quite - they require the setting of an extra bit
in the FCR register to enable the UART module. The serial_out
implementation is the same as that in arch/mips/jz4740/serial.c - which
will shortly be removed.
Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: linux-serial@xxxxxxxxxxxxxxx
---
V2 changes
Removed FSF address
Added select SERIAL_CORE_CONSOLE to fix a build error
---
drivers/tty/serial/8250/8250_jz47xx.c | 225 ++++++++++++++++++++++++++++++++++
drivers/tty/serial/8250/Kconfig | 9 ++
drivers/tty/serial/8250/Makefile | 1 +
3 files changed, 235 insertions(+)
create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c
diff --git a/drivers/tty/serial/8250/8250_jz47xx.c b/drivers/tty/serial/8250/8250_jz47xx.c
new file mode 100644
index 0000000..49a63ce
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_jz47xx.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright (C) 2010 Lars-Peter Clausen <lars@xxxxxxxxxx>
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * Ingenic jz47xx series UART support
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+struct jz47xx_uart_data {
+ struct clk *clk_module;
+ struct clk *clk_baud;
+ int line;
+};
+
+#define UART_FCR_UME BIT(4)
+
+static struct earlycon_device *early_device;
+
+static uint8_t __init early_in(struct uart_port *port, int offset)
+{
+ return readl(port->membase + (offset << 2));
+}
+
+static void __init early_out(struct uart_port *port, int offset, uint8_t value)
+{
+ writel(value, port->membase + (offset << 2));
+}
+
+static void __init jz47xx_early_console_putc(struct uart_port *port, int c)
+{
+ uint8_t lsr;
+
+ do {
+ lsr = early_in(port, UART_LSR);
+ } while ((lsr & UART_LSR_TEMT) == 0);
+
+ early_out(port, UART_TX, c);
+}
+
+static void __init jz47xx_early_console_write(struct console *console,
+ const char *s, unsigned int count)
+{
+ uart_console_write(&early_device->port, s, count, jz47xx_early_console_putc);
+}
+
+static int __init jz47xx_early_console_setup(struct earlycon_device *dev,
+ const char *opt)
+{
+ struct uart_port *port = &dev->port;
+ unsigned int baud, divisor;
+
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ baud = dev->baud ?: 115200;
+ divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
+
+ early_out(port, UART_IER, 0);
+ early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+ early_out(port, UART_DLL, 0);
+ early_out(port, UART_DLM, 0);
+ early_out(port, UART_LCR, UART_LCR_WLEN8);
+ early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT |
+ UART_FCR_CLEAR_RCVR | UART_FCR_ENABLE_FIFO);
+ early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR);
+
+ early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+ early_out(port, UART_DLL, divisor & 0xff);
+ early_out(port, UART_DLM, (divisor >> 8) & 0xff);
+ early_out(port, UART_LCR, UART_LCR_WLEN8);
+
+ early_device = dev;
+ dev->con->write = jz47xx_early_console_write;
+
+ return 0;
+}
+EARLYCON_DECLARE(jz4740_uart, jz47xx_early_console_setup);
+OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart", jz47xx_early_console_setup);
+EARLYCON_DECLARE(jz4780_uart, jz47xx_early_console_setup);
+OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", jz47xx_early_console_setup);
+
+static void jz47xx_serial_out(struct uart_port *p, int offset, int value)
+{
+ switch (offset) {
+ case UART_FCR:
+ /* UART module enable */
+ value |= UART_FCR_UME;
+ break;
+
+ case UART_IER:
+ value |= (value & 0x4) << 2;
+ break;
+
+ default:
+ break;
+ }
+
+ writeb(value, p->membase + (offset << p->regshift));
+}
+
+static int jz47xx_probe(struct platform_device *pdev)
+{
+ struct uart_8250_port uart = {};
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct jz47xx_uart_data *data;
+ int err;
+
+ if (!regs || !irq) {
+ dev_err(&pdev->dev, "no registers/irq defined\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.type = PORT_16550;
+ uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.mapbase = regs->start;
+ uart.port.regshift = 2;
+ uart.port.serial_out = jz47xx_serial_out;
+ uart.port.irq = irq->start;
+ uart.port.dev = &pdev->dev;
+
+ uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
+ resource_size(regs));
+ if (!uart.port.membase)
+ return -ENOMEM;
+
+ data->clk_module = devm_clk_get(&pdev->dev, "module");
+ if (IS_ERR(data->clk_module)) {
+ err = PTR_ERR(data->clk_module);
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "unable to get module clock: %d\n", err);
+ return err;
+ }
+
+ data->clk_baud = devm_clk_get(&pdev->dev, "baud");
+ if (IS_ERR(data->clk_baud)) {
+ err = PTR_ERR(data->clk_baud);
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "unable to get baud clock: %d\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(data->clk_module);
+ if (err) {
+ dev_err(&pdev->dev, "could not enable module clock: %d\n", err);
+ goto out;
+ }
+
+ err = clk_prepare_enable(data->clk_baud);
+ if (err) {
+ dev_err(&pdev->dev, "could not enable baud clock: %d\n", err);
+ goto out_disable_moduleclk;
+ }
+ uart.port.uartclk = clk_get_rate(data->clk_baud);
+
+ data->line = serial8250_register_8250_port(&uart);
+ if (data->line < 0) {
+ err = data->line;
+ goto out_disable_baudclk;
+ }
+
+ platform_set_drvdata(pdev, data);
+ return 0;
+
+out_disable_baudclk:
+ clk_disable_unprepare(data->clk_baud);
+out_disable_moduleclk:
+ clk_disable_unprepare(data->clk_module);
+out:
+ return err;
+}
+
+static int jz47xx_remove(struct platform_device *pdev)
+{
+ struct jz47xx_uart_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ clk_disable_unprepare(data->clk_module);
+ clk_disable_unprepare(data->clk_baud);
+ return 0;
+}
+
+static const struct of_device_id jz47xx_of_match[] = {
+ { .compatible = "ingenic,jz4740-uart" },
+ { .compatible = "ingenic,jz4780-uart" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jz47xx_of_match);
+
+static struct platform_driver jz47xx_platform_driver = {
+ .driver = {
+ .name = "jz47xx-uart",
+ .owner = THIS_MODULE,
+ .of_match_table = jz47xx_of_match,
+ },
+ .probe = jz47xx_probe,
+ .remove = jz47xx_remove,
+};
+
+module_platform_driver(jz47xx_platform_driver);
+
+MODULE_AUTHOR("Paul Burton");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Ingenic jz47xx SoC series UART driver");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 0fcbcd2..ebb298e 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -322,3 +322,12 @@ config SERIAL_8250_MT6577
help
If you have a Mediatek based board and want to use the
serial port, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_JZ47XX
+ tristate "Support for Ingenic jz47xx series serial ports"
+ depends on SERIAL_8250
+ select SERIAL_EARLYCON
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have a system using an Ingenic jz47xx series SoC and wish to
+ make use of its UARTs, say Y to this option. If unsure, say N.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 31e7cdc..ddbcb7a 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
+obj-$(CONFIG_SERIAL_8250_JZ47XX) += 8250_jz47xx.o
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
