- Add dt-bindings documentation for Sony IMX283 sensor driver - Add MAINTAINERS entry for Sony IMX283 binding documentation Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx> --- .../bindings/media/i2c/sony,imx283.yaml | 107 ++++++++++++++++++ MAINTAINERS | 8 ++ 2 files changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml new file mode 100644 index 000000000000..e4f49f1435a5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2024 Ideas on Board Oy +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX283 Sensor + +maintainers: + - Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> + - Umang Jain <umang.jain@xxxxxxxxxxxxxxxx> + +description: + IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active + array size of 5472H x 3648V. It is programmable through I2C interface. The + I2C client address is fixed to 0x1a as per sensor data sheet. Image data is + sent through MIPI CSI-2. + +properties: + compatible: + const: sony,imx283 + + reg: + maxItems: 1 + + clocks: + description: Clock frequency from 6 to 24 MHz. + maxItems: 1 + + vadd-supply: + description: Analog power supply (2.9V) + + vdd1-supply: + description: Interface power supply (1.8V) + + vdd2-supply: + description: Digital power supply (1.2V) + + reset-gpios: + description: Sensor reset (XCLR) GPIO + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + anyOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx283"; + reg = <0x1a>; + clocks = <&imx283_clk>; + + assigned-clocks = <&imx283_clk>; + assigned-clock-parents = <&imx283_clk_parent>; + assigned-clock-rates = <12000000>; + + vadd-supply = <&camera_vadd_2v9>; + vdd1-supply = <&camera_vdd1_1v8>; + vdd2-supply = <&camera_vdd2_1v2>; + + port { + imx283: endpoint { + remote-endpoint = <&cam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000>; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 73d898383e51..32f790c3a5f9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20368,6 +20368,14 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml F: drivers/media/i2c/imx274.c +SONY IMX283 SENSOR DRIVER +M: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> +M: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx> +L: linux-media@xxxxxxxxxxxxxxx +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml + SONY IMX290 SENSOR DRIVER M: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> L: linux-media@xxxxxxxxxxxxxxx -- 2.43.0
