Re: [PATCH 2/2] mips: dts: ralink: mt7621: add serial1 and serial2 nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sergio

On 2024-03-07 12:04, Sergio Paracuellos wrote:
Hi Justin,

On Wed, Mar 6, 2024 at 9:11 PM Justin Swartz
<justin.swartz@xxxxxxxxxxxxxxxx> wrote:

Add serial1 and serial2 nodes to define the existence of
UART1 and UART2.

Signed-off-by: Justin Swartz <justin.swartz@xxxxxxxxxxxxxxxx>
---
arch/mips/boot/dts/ralink/mt7621.dtsi | 38 +++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index dca415fdd..2069249c8 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -128,6 +128,44 @@ serial0: serial@c00 {
                        pinctrl-0 = <&uart1_pins>;
                };

+               serial1: serial@d00 {
+                       status = "disabled";
+
+                       compatible = "ns16550a";
+                       reg = <0xd00 0x100>;
+
+                       clocks = <&sysc MT7621_CLK_UART2>;
+
+                       interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>;
+
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       no-loopback-test;
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart2_pins>;
+               };
+
+               serial2: serial@e00 {
+                       status = "disabled";
+
+                       compatible = "ns16550a";
+                       reg = <0xe00 0x100>;
+
+                       clocks = <&sysc MT7621_CLK_UART3>;
+
+                       interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>;
+
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       no-loopback-test;
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart3_pins>;
+               };
+

Please follow the preferred order for properties described in dts
coding style [0]. I know that there is some mess around the properties
order in some nodes with the current dtsi file but we did not have
coding style before and now we have it, so I think we should follow it
at least for new additions.

No problem. I see you've already "Acked-by" patch 1 (adding pinctrl
properties to serial0) of this set, so would it be a better move to
submit a new patch set that would look something like:

1. add pinctrl-name and pinctrl-0 to serial0 [no changes from what I sent]
 2. reorder serial0 properties according to the DTS style guidelines
 3. add serial1 and serial2 with the correct property order

Or instead, submit one more patch that will reorder the properties in
serial0, serial1 and serial2 - which would depend on the current set?


Best regards,
    Sergio Paracuellos

Regards
Justin


[0]: https://docs.kernel.org/devicetree/bindings/dts-coding-style.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux