[PATCH v16 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Power event IRQ is used for wakeup in cases:
a) where the controller is super speed capable and missing an
ss_phy interrupt.
b) where the GIC is not capable of detecting DP/DM hs phy irq's.

Power event IRQ stat register indicates whether high speed phy
entered and exited L2 successfully during suspend and resume.
Indicate the same for all ports of multiport.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index c0a6de50ec09..365f01a6b581 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -52,6 +52,13 @@
 #define APPS_USB_AVG_BW 0
 #define APPS_USB_PEAK_BW MBps_to_icc(40)
 
+static const u32 pwr_evnt_irq_stat_reg[DWC3_MAX_PORTS] = {
+	0x58,
+	0x1dc,
+	0x228,
+	0x238,
+};
+
 struct dwc3_qcom_port {
 	int			qusb2_phy_irq;
 	int			dp_hs_phy_irq;
@@ -421,9 +428,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
 	if (qcom->is_suspended)
 		return 0;
 
-	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
-	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
-		dev_err(qcom->dev, "HS-PHY not in L2\n");
+	for (i = 0; i < qcom->num_ports; i++) {
+		val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
+		if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+			dev_err(qcom->dev, "port-%d HS-PHY not in L2\n", i + 1);
+	}
 
 	for (i = qcom->num_clocks - 1; i >= 0; i--)
 		clk_disable_unprepare(qcom->clks[i]);
@@ -471,9 +480,12 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
 	if (ret)
 		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
 
+	for (i = 0; i < qcom->num_ports; i++) {
 	/* Clear existing events from PHY related to L2 in/out */
-	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
-			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+		dwc3_qcom_setbits(qcom->qscratch_base,
+				  pwr_evnt_irq_stat_reg[i],
+				  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+	}
 
 	qcom->is_suspended = false;
 
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux