Re: [PATCH v5 1/1] arm64: dts: qcom: ipq6018: add sdhci node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 6 Mar 2024 at 14:31, Chukun Pan <amadeus@xxxxxxxxxx> wrote:
>
> Add node to support mmc controller inside of IPQ6018.
> This controller supports both eMMC and SD cards.
>
> Tested with:
>   eMMC (HS200)
>   SD Card (SDR50/SDR104)
>
> Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/ipq6018.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index 322eced0b876..420c192bccd9 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -441,6 +441,25 @@ dwc_1: usb@7000000 {
>                         };
>                 };
>
> +               sdhc: mmc@7804000 {
> +                       compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
> +                       reg = <0x0 0x07804000 0x0 0x1000>,
> +                             <0x0 0x07805000 0x0 0x1000>;
> +                       reg-names = "hc", "cqhci";
> +
> +                       interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "hc_irq", "pwr_irq";
> +
> +                       clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> +                                <&gcc GCC_SDCC1_APPS_CLK>,
> +                                <&xo>;
> +                       clock-names = "iface", "core", "xo";
> +                       resets = <&gcc GCC_SDCC1_BCR>;
> +                       max-frequency = <192000000>;

If I understand correctly, GCC_SDCC1_APPS_CLK support frequencies up
to 384 MHz, but here you are limiting it to 192 MHz. Why is it so?

> +                       status = "disabled";
> +               };
> +
>                 blsp_dma: dma-controller@7884000 {
>                         compatible = "qcom,bam-v1.7.0";
>                         reg = <0x0 0x07884000 0x0 0x2b000>;
> --
> 2.25.1
>
>


-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux