On Wed, 6 Mar 2024 at 18:53, Sriram Dash <quic_sriramd@xxxxxxxxxxx> wrote:
>
> On 3/6/2024 2:15 PM, Dmitry Baryshkov wrote:
> > On Tue, 5 Mar 2024 at 18:59, Sriram Dash <quic_sriramd@xxxxxxxxxxx> wrote:
> >>
> >> Some target systems allow multiple resources to be managed by firmware.
> >> On these targets, tasks related to clocks, regulators, resets, and
> >> interconnects can be delegated to the firmware, while the remaining
> >> responsibilities are handled by Linux.
> >>
> >> The driver is responsible for managing multiple power domains and
> >> linking them to consumers as needed. Incase there is only single
> >> power domain, it is considered to be a standard GDSC hooked on to
> >> the qcom dt node which is read and assigned to device structure
> >> (by genpd framework) before the driver probe even begins.
> >>
> >> This differentiation logic allows the driver to determine whether
> >> device resources are managed by Linux or firmware, ensuring
> >> backward compatibility.
> >>
> >> Furthermore, minor cleanup is performed for the private data of
> >> the SNPS Femto PHY. However, ACPI handling is omitted due to the
> >> absence of clients on the ACPI side.
> >>
> >> Signed-off-by: Sriram Dash <quic_sriramd@xxxxxxxxxxx>
> >> ---
> >> drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 290 ++++++++++++++++++++------
> >> drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 213 +++++++++++++++----
> >> drivers/usb/dwc3/dwc3-qcom.c | 259 +++++++++++++++++------
[skipped]
> >> @@ -2165,9 +2305,11 @@ static int qmp_usb_probe(struct platform_device *pdev)
> >> */
> >> pm_runtime_forbid(dev);
> >>
> >> - ret = phy_pipe_clk_register(qmp, np);
> >> - if (ret)
> >> - goto err_node_put;
> >> + if (!qmp->fw_managed) {
> >> + ret = phy_pipe_clk_register(qmp, np);
> >> + if (ret)
> >> + goto err_node_put;
> >
> > pipe_clk is an input to the GCC. If you are not registering it here,
> > how would GCC get it?
> >
>
> The pipe clk will be managed by the firmware.
Which pipe clk? Coming from the PHY to GCC or from GCC back to the PHY?
Anyway, you can not drop this, this will break the ABI. The rule of
thumb: existing DTB files MUST continue to work.
> >> + }
> >>
> >> qmp->phy = devm_phy_create(dev, np, &qmp_usb_phy_ops);
> >> if (IS_ERR(qmp->phy)) {
--
With best wishes
Dmitry
