From: Duy Nguyen <duy.nguyen.rh@xxxxxxxxxxx>
Document support for the Thermal Sensor/Chip Internal Voltage
Monitor/Core Voltage Monitor (THS/CIVM/CVM) on the Renesas R-Car V4M
(R8A779H0) SoC.
Just like on other R-Car Gen4 SoCs, interrupts are not routed to the
INTC-AP (GIC) but to the Error Control Module (ECM).
Signed-off-by: Duy Nguyen <duy.nguyen.rh@xxxxxxxxxxx>
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Changes compared to the BSP:
- No interrupts property, as interrupts are routed to the ECM.
---
.../devicetree/bindings/thermal/rcar-gen3-thermal.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index ecf276fd155cfb27..6a81cb6e11bc1e14 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -29,6 +29,7 @@ properties:
- renesas,r8a779a0-thermal # R-Car V3U
- renesas,r8a779f0-thermal # R-Car S4-8
- renesas,r8a779g0-thermal # R-Car V4H
+ - renesas,r8a779h0-thermal # R-Car V4M
reg: true
@@ -90,6 +91,7 @@ else:
enum:
- renesas,r8a779f0-thermal
- renesas,r8a779g0-thermal
+ - renesas,r8a779h0-thermal
then:
required:
- interrupts
--
2.34.1
