Add nodes representing the block devices exposed by an MMC device including an example involving nvmem-cells. Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> --- .../devicetree/bindings/mmc/mmc-card.yaml | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.yaml b/Documentation/devicetree/bindings/mmc/mmc-card.yaml index fd347126449ac..95ccbda871d24 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-card.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml @@ -26,6 +26,18 @@ properties: Use this to indicate that the mmc-card has a broken hpi implementation, and that hpi should not be used. + block: + $ref: /schemas/block/block-device.yaml# + description: + Represents the block storage provided by an SD card or the + main hardware partition of an eMMC. + +patternProperties: + '^boot[0-9]+': + $ref: /schemas/block/block-device.yaml# + description: + Represents a boot hardware partition on an eMMC. + required: - compatible - reg @@ -42,6 +54,39 @@ examples: compatible = "mmc-card"; reg = <0>; broken-hpi; + + block { + partitions { + cal_data: block-partition-rf { + partnum = <3>; + partname = "rf"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + }; + }; + + boot1 { + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr: macaddr@a { + compatible = "mac-base"; + reg = <0xa 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; }; }; -- 2.44.0