Re: [PATCH v8 5/7] arm64: dts: qcom: sm8450: Add opp table support to PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/4/2024 11:19 PM, Manivannan Sadhasivam wrote:
On Sat, Mar 02, 2024 at 09:29:59AM +0530, Krishna chaitanya chundru wrote:
PCIe needs to choose the appropriate performance state of RPMH power
domain and interconnect bandwidth based up on the PCIe gen speed.

Add the OPP table support to specify RPMH performance states and
interconnect peak bandwidth.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm8450.dtsi | 74 ++++++++++++++++++++++++++++++++++++
  1 file changed, 74 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 6b1d2e0d9d14..662f2129f20d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1827,7 +1827,32 @@ pcie0: pcie@1c00000 {
  			pinctrl-names = "default";
  			pinctrl-0 = <&pcie0_default_state>;
+ operating-points-v2 = <&pcie0_opp_table>;
+
  			status = "disabled";
+
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-2500000 {

Add the comments that you added below.
ACK.

+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;

Isn't the peak bw should be greater that the avg bw? Atleast in upstream we
follow that pattern.

- Mani
The two values which are defined are for peak BW only one value corresponds to PCI-MEM path and other to CPU to PCIe path.
- Krishna Chaitanya.

+				};
+
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+			};
+
  		};
pcie0_phy: phy@1c06000 {
@@ -1938,7 +1963,56 @@ pcie1: pcie@1c08000 {
  			pinctrl-names = "default";
  			pinctrl-0 = <&pcie1_default_state>;
+ operating-points-v2 = <&pcie1_opp_table>;
+
  			status = "disabled";
+
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1x2 GEN 2x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3x2 GEN 4x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
  		};
pcie1_phy: phy@1c0e000 {

--
2.42.0






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux