The adv7535 has some extra reg-name which can be removed since the defaults that are used when these are not assigned work just fine. Removing them and adding some required regulators make the errors detected from CHECK_DTBS go away. Signed-off-by: Adam Ford <aford173@xxxxxxxxx> --- Requires: https://patchwork.kernel.org/project/linux-arm-kernel/patch/20240305004859.201085-2-aford173@xxxxxxxxx/ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index fba8fd04398d..b1cd0f0b9c13 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -302,12 +302,19 @@ pca6416_3: gpio@20 { adv_bridge: hdmi@3d { compatible = "adi,adv7535"; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>; + reg-names = "main"; interrupt-parent = <&gpio4>; interrupts = <27 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; #sound-dai-cells = <0>; + avdd-supply = <&buck5>; + dvdd-supply = <&buck5>; + pvdd-supply = <&buck5>; + a2vdd-supply = <&buck5>; + v1p2-supply = <&buck5>; + v3p3-supply = <&buck4>; + ports { #address-cells = <1>; -- 2.43.0
