This patchset contains the initial common clock support for Broadcom's iProc family of SoCs. The iProc clock architecture comprises of various PLLs, e.g., ARMPLL, GENPLL, LCPLL0, MIPIPLL, and etc. An onboard crystal serves as the basic reference clock for these PLLs. Each PLL may have several leaf clocks. One special group of clocks is the ASIU clocks, which are dervied directly from the crystal reference clock. This patchset also contains the basic clock support for the Broadcom Cygnus SoC, which implements the iProc clock architecture Changes from v3: - Fix incorrect use of passing in of_clk_src_onecell_get when adding ARM PLL and other iProc PLLs as clock provider. These PLLs have zero cells in DT and thefore of_clk_src_simple_get should be used instead - Rename Cygnus MIPI PLL Channel 2 clock from BCM_CYGNUS_MIPIPLL_CH2_UNUSED to BCM_CYGNUS_MIPIPLL_CH2_V3D, since a 3D graphic rendering engine has been integrated into Cygnus revision B0 and has its core clock running off MIPI PLL Channel 2 - Changed default MIPI PLL VCO frequency from 1.75 GHz to 2.1 GHz. This allows us to derive 300 MHz V3D clock from channel 2 through the post divisor Changes from v2: - Re-arrange Cygnus clock/pll init functions so each init function is right next to its clock table - Removed #defines for number of clocks in Cygnus. Have the number of clocks automatically determined based on array size of the clock table Changes from v1: - Separate drivers/clk/Makefile change for drivers/clk/bcm out to a standalone patch Ray Jui (5): clk: iproc: define Broadcom iProc clock binding clk: iproc: add initial common clock support clk: Change bcm clocks build dependency clk: cygnus: add clock support for Broadcom Cygnus ARM: dts: enable clock support for Broadcom Cygnus arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 110 +++++-- arch/arm/boot/dts/bcm-cygnus.dtsi | 2 +- brcm,iproc-clocks.txt | 178 ++++++++++++ drivers/clk/Makefile | 2 +- drivers/clk/bcm/Kconfig | 9 + drivers/clk/bcm/Makefile | 2 + drivers/clk/bcm/clk-cygnus.c | 277 ++++++++++++++++++ drivers/clk/bcm/clk-iproc-armpll.c | 282 ++++++++++++++++++ drivers/clk/bcm/clk-iproc-asiu.c | 275 ++++++++++++++++++ drivers/clk/bcm/clk-iproc-clk.c | 238 +++++++++++++++ drivers/clk/bcm/clk-iproc-pll.c | 478 +++++++++++++++++++++++++++++++ drivers/clk/bcm/clk-iproc.h | 155 ++++++++++ include/dt-bindings/clock/bcm-cygnus.h | 65 +++++ 13 files changed, 2046 insertions(+), 27 deletions(-) create mode 100644 brcm,iproc-clocks.txt create mode 100644 drivers/clk/bcm/clk-cygnus.c create mode 100644 drivers/clk/bcm/clk-iproc-armpll.c create mode 100644 drivers/clk/bcm/clk-iproc-asiu.c create mode 100644 drivers/clk/bcm/clk-iproc-clk.c create mode 100644 drivers/clk/bcm/clk-iproc-pll.c create mode 100644 drivers/clk/bcm/clk-iproc.h create mode 100644 include/dt-bindings/clock/bcm-cygnus.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
